| Author |
Message |
    
B_d
New member
Username: B_d
Post Number: 8
Registered: 1-2007
| | Posted on Sunday, February 11, 2007 - 10:58 am: | 
|
How do i line up the fine course to be on freq.at the 12oclock mine has slid to the 10oclock.I can't get the 5kz down now. Was ok brand new radio.Thanks |
B_d
New member
Username: B_d
Post Number: 9
Registered: 1-2007
| | Posted on Monday, February 12, 2007 - 3:31 pm: |
|
Hello Anyone Here? |
Tech808
Moderator
Username: Tech808
Post Number: 13016
Registered: 8-2002
| | Posted on Monday, February 12, 2007 - 4:54 pm: |
|
B_d
Adjust:
Fine and coarse clarifier control to center detent.
10.240 MHz PLL REFERENCE: RX Mode, AM,
Connect Frequency counter to IC5 Pin 4.
Check for 10.2400MHz �200 Hz. If tolerance is beyond this, replace X1 (10.240MHz
NOTE!
If you do not have the experience or equipment to do this you will need to contact Sam Lewis as changing the settings can and probably will void your Magnum Factory Warranty.
You will find Sam's contact information listed in the TOPIC TITLED: "How do I contact Sam Lewis direct?"
Lon ~ Tech808 ~ N9CEF
CEF#808 ~ CEF HAM#33 ~ CVC#002
10-10 #61493 ~ 10-10 VP#2688
Tech808@copperelectronics.com
|
B_d
Junior Member
Username: B_d
Post Number: 10
Registered: 1-2007
| | Posted on Monday, February 12, 2007 - 11:56 pm: |
|
Ok i will leave it alone no big thing.Thanks for the reply
K4WKM
106/CEF-873
|
