Monk
Junior Member Username: Monk
Post Number: 25 Registered: 2-2002
| Posted on Sunday, April 16, 2006 - 1:44 pm: |
|
I did a 2030 conversion on my 25gtl and found an extra step that helps tune up the output. #4 Remove tuning slug form L10 and discard. New #4 Unsolder L10 and unwrap 1 turn from coil, cut off excess, scrape off the insulation and resolder into board. Leave the slug in coil. Now you can use L10 to tune for max forward swing. Monk |