| Author |
Message |
    
Fusebreaker
Intermediate Member
Username: Fusebreaker
Post Number: 109
Registered: 3-2004
| | Posted on Friday, September 02, 2005 - 3:19 pm: | 
|
I found this on another site,
Remove D-18,R-110,C131 and R112.
Put jumper in R-110.
take orange wire from delta tune and unsolder it from the board and resolder it to TR-23 solder it to pin closest to front of the radio.
Put radio back together and it should slide about 5kc up/down.
For more slide to go on a channels!! Change D-16 to a 1N4007 diode
hope all ya`ll enjoy. |
Patzerozero
Senior Member
Username: Patzerozero
Post Number: 1359
Registered: 7-2004
| | Posted on Friday, September 02, 2005 - 6:25 pm: |
|
copper talk>>modifications>>radios>>how to make a 29 ltd slide>>taz>>thursday june13, 2002>>1:29PM |
Fusebreaker
Intermediate Member
Username: Fusebreaker
Post Number: 110
Registered: 3-2004
| | Posted on Saturday, September 03, 2005 - 5:11 pm: |
|
oh ok i did not know that was on here just trying to help |
Fusebreaker
Intermediate Member
Username: Fusebreaker
Post Number: 111
Registered: 3-2004
| | Posted on Saturday, September 03, 2005 - 5:57 pm: |
|
is an alignment required with this mod i would think it would be |
Patzerozero
Senior Member
Username: Patzerozero
Post Number: 1374
Registered: 7-2004
| | Posted on Saturday, September 03, 2005 - 6:31 pm: |
|
easy, fuse!
that mod is only to get the delta tune to slide on transmit. what would normally appear to make it slide transmit, will NOT work on standard AM radio. same with channel mods, other then xtal swap, expo kit is only way to get expanded freqs.
realign not neccessary for slide, expo kit...well i've done it by ear with a walkie talkie & got it just as close as freq counter, & rcv needs touchup only occasionally. |
Fusebreaker
Intermediate Member
Username: Fusebreaker
Post Number: 118
Registered: 3-2004
| | Posted on Tuesday, September 06, 2005 - 11:34 pm: |
|
ok thanks |
