| Author |
Message |
    
Nickle
New member
Username: Nickle
Post Number: 6
Registered: 5-2005
| | Posted on Thursday, June 16, 2005 - 10:22 am: | 
|
does anyone know how to make this amp to modulate better on the 27000 frq. because now it does better on the 26000 freqs.than any other freq. Or should I use it for a boat ancher????? |
Patzerozero
Advanced Member
Username: Patzerozero
Post Number: 942
Registered: 7-2004
| | Posted on Friday, June 17, 2005 - 4:15 pm: |
|
how does the RADIO modulate @ 27 vs 26? & what outputs are you getting with that amp at what freqs? where is antenna best tuned at? sounds more like issue is with radio then amp. |
Patzerozero
Advanced Member
Username: Patzerozero
Post Number: 945
Registered: 7-2004
| | Posted on Friday, June 17, 2005 - 6:52 pm: |
|
was talking to someone moments ago that has 1 that's seen better days. how is it modded to 11m? by way of a wire soldered across heavy coil? he said wire could be soldered across at wrong point effectively moving freq too far down. |
Al_lafon
Intermediate Member
Username: Al_lafon
Post Number: 146
Registered: 3-2005
| | Posted on Sunday, January 08, 2006 - 1:36 pm: |
|
I feel you may need to move the tap on L2 it may be off a little. What i'd do is go to a hobbie shop and pick up some brass stock sheet thin
kind and make a small clip that you can put a
screw and nut thu. then put a lug om the wire or
tap now you can tune it by moving up and down
that L2 coil in 1/4 in to start when you see
what your looking for then 1/8. When you find the
sweet spot just lock your screw down.
P.S. have Schematic for that 305
contact me if you need that
a_g_lafon@comcast.net |
