| Author |
Message |
    
Straycat
| | Posted on Friday, August 24, 2001 - 11:59 pm: | 
|
How do you put a talklback in a TS3010 ? I've tried the resistor to the center pin of the speaker jack and tried grounding the speaker to the chassis and the frame with no luck. |
Anonymous
| | Posted on Saturday, August 25, 2001 - 1:18 pm: |
|
dont ground the speaker,not good |
Skullman
| | Posted on Saturday, August 25, 2001 - 5:56 pm: |
|
Straycat, I'm not lucky enough to have any experience with an Emporer 3010, but I'll tell you what I know.
First, the way I usually put a talkback in is to jump a resistor between the center pins of the PA and EXT. Speaker, you'll have to experiment with the resistor values to find the right volume of talkback you want.
Second, if that doesn't work, check into a variable talkback kit. They sell them all over the net.
Both of these mods are the simplest ways I know of, but I will do some more surfing and see what I come up with. Stay tuned.
CEO of DEADMAN INC. |
vernonott
| | Posted on Saturday, August 25, 2001 - 8:47 pm: |
|
Straycat:I saw a talkback kit in a truck stop today.It has a volume control and 1/8"speaker pins for plugging into your external and PA speaker jacks on the back of your radio. |
vernonott
| | Posted on Saturday, August 25, 2001 - 8:49 pm: |
|
Straycat:I saw a talkback kit in a truck stop today.It has a volume control and 1/8"speaker pins for plugging into your external and PA speaker jacks on the back of your radio. |
Straycat
| | Posted on Sunday, August 26, 2001 - 9:28 am: |
|
Vernonott I have two of those talkback kits and they work great with most of my radios. They don't work with all though and the TS3010 is one of them. I tried the PA to Speaker jack deal too but am baffled. |
HONKY TONK MAN 593 OUTTA NC!!
| | Posted on Sunday, August 26, 2001 - 10:34 am: |
|
just curious does your emperor 3010 squel and have low audio like mine did?? the mike jack is not grounded? |
Straycat
| | Posted on Sunday, August 26, 2001 - 12:14 pm: |
|
Honky Tonk Man 593 my 3010 doesn't squeal and has super audio. I think the problems you're referring to have been taken care of by a previous owner but as an aside I'll check the mike jack grounding. That may be a contributing cause. The only problem my 3010 has is the real low motorboating sound when the channel is dead quiet but I just haven't gotten around to soldering the offending capacitor flush with the board. |
HONKY TONK MAN 593 OUTTA NC!!
| | Posted on Monday, August 27, 2001 - 8:16 pm: |
|
ah yes the motorboating sound i remember that!!! hated it. oh well just no luck with the one i had good luck to you though. |
