| Author |
Message |
    
Dale
Advanced Member
Username: Dale
Post Number: 811
Registered: 12-2002
| | Posted on Sunday, April 29, 2007 - 4:24 pm: | 
|
gotta chance for this radio ive heard on the air.problem is on ssb its way off frequency
like instead of 273850 its around .3846.this
was confirmed by two guys running hf rigs
a ts940 and a icom706.one guy said .3845 and the other said .3846 so i wanna get it on freq. cause ya sound like a girl when txing its so bad.
does the tx adjustment vr fix this.i also noticed 3 pots that were am,lsb,usb?????????
dale/a.k.a.hotrod
cef426
cvc#64
|
Kid_vicious
Senior Member
Username: Kid_vicious
Post Number: 2514
Registered: 9-2004
| | Posted on Sunday, April 29, 2007 - 11:16 pm: |
|
here is an alignment proc. i found online.
i have not tried it myself, but the source is reliable.
5. Put the lead of frequency counter on C314 (right of 150 Pf) and then adjust below.
a) Adjust L126 so as frequency to be 10.6925MHz in LSB mode, RX.
b) Adjust L127 so as frequency to be 10.6975MHz in USB mode, RX.
c) Adjust L124 so as frequency to be 10.695MHz in AM mode TX and then check if frequency is 10.6975MHz at USB and 10.6925MHz in LSB
that should put you right on freq.
later,
matt
anyone wanting a "clean signal", just look to the left and build one of these!!!
|
Dale
Advanced Member
Username: Dale
Post Number: 820
Registered: 12-2002
| | Posted on Monday, April 30, 2007 - 7:57 pm: |
|
ok thanks kv
dale/a.k.a.hotrod
cef426
cvc#64
|
|
