Copper Talk » Ask The Tech » Radio's Mobile » Archived Messages » Tune up info for the Connex 4800 DXL « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Sodapop
Posted on Monday, January 07, 2002 - 7:50 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I need to know what does what. What to turn and what not to turn. Any info would help, but my main concern is the modulation adjustment and power adjustment. I had some info on the radio in question, but have lost the paperwork. Thanks!
Top of pagePrevious messageNext messageBottom of page Link to this message

Sodapop
Posted on Monday, January 07, 2002 - 9:49 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I found the info I needed. A friend of mine sent me what I needed. So if anyone needs some tune up info for this radio, just let me know!
Top of pagePrevious messageNext messageBottom of page Link to this message

Highlander
Posted on Monday, January 07, 2002 - 8:58 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Sodapop, try this link.

http://www.qsl.net/w8cwe/ept6900.html

Your radio has the ept6900 board, so the info should be the same for your rig.

Congratulations on that new 4800dxl! I have a Galaxy Dx2517(Same board, same manufacturer-RCI) with several of the enhancements covered in that link, and it is terrific performer. I had the AF amp and Vregulator changed, and the AM detection and NB diodes done, and the receiver transistor swapped for a higher gain, lower noise transistor. Then a complete alignment and tuneup and CQ DX!!!
Top of pagePrevious messageNext messageBottom of page Link to this message

Sodapop
Posted on Tuesday, January 08, 2002 - 9:23 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Well last night the skip was LOUD. But I had a few locals tell me how the radio sounded. And all reports were top notch. So today I am going to try to talk some skip. Should be fun!

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: