Author |
Message |
Bullseye
Intermediate Member Username: Bullseye
Post Number: 296 Registered: 1-2002
| Posted on Friday, April 06, 2007 - 9:47 am: |
|
I want to use a ball mount with the "lug type" connector in my mobile. Will this thing work to run 300-600 watts max through it? Will be using either Belden RG-8X or Times LMR-240 coax if it matters. Bullseye/CEF#110/Mem. Since 1/18/2002
|
Jameslarson
Intermediate Member Username: Jameslarson
Post Number: 295 Registered: 4-2006
| Posted on Friday, April 06, 2007 - 10:26 am: |
|
Yeah, you should be fine. What kind of antenna? What kind of car? Thanks. |
Vanillagorilla
Advanced Member Username: Vanillagorilla
Post Number: 978 Registered: 4-2005
| Posted on Friday, April 06, 2007 - 11:04 am: |
|
YES..NO problem Hank~CEF559 Northeast Net Control Eastern Long Island NY
|
Bullseye
Intermediate Member Username: Bullseye
Post Number: 297 Registered: 1-2002
| Posted on Friday, April 06, 2007 - 1:19 pm: |
|
Duh I guess giving all the info. would help. I'm going with the Anttron A-1700 on a '93 Jeep Cherokee. Bullseye/CEF#110/Mem. Since 1/18/2002
|
Patzerozero
Senior Member Username: Patzerozero
Post Number: 3594 Registered: 7-2004
| Posted on Saturday, April 07, 2007 - 3:02 pm: |
|
if your installation allows the use of ANY coax, use lmr400 or 9913. the lug is preferred to an S0239. as long as the ball mount is of high quality, go for it. |
Bullseye
Intermediate Member Username: Bullseye
Post Number: 299 Registered: 1-2002
| Posted on Saturday, April 07, 2007 - 6:38 pm: |
|
The coax will be running between the roof and headliner so most any coax will work.Happen to have about 50 ft. of 9913 laying out in the garage now.Problem is making the bends behind the dash panel between the radio,amp,and meter. Bullseye/CEF#110/Mem. Since 1/18/2002
|
Tech833
Moderator Username: Tech833
Post Number: 1648 Registered: 8-2002
| Posted on Sunday, April 08, 2007 - 10:38 am: |
|
LMR240 will easily handle your 600 watts. Go for it! |