Copper Talk » Ask The Tech » Installations » Ping install ! « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Biskybabyusa
New member
Username: Biskybabyusa

Post Number: 9
Registered: 11-2006


Posted on Friday, December 08, 2006 - 9:24 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I am installing a "ping keyup" in my Washington. wired red to on/off switch, black to ground. Yellow audio wire says to "audio input" (would be pin 1?), green to transmit (would be pin 5 ?).Do these wire to the mic jack in the radio ? I did hear the ping when I keyed the mic (so I know it works), but when not keyed it was squeeling (like when I first turn the radio on).
Top of pagePrevious messageNext messageBottom of page Link to this message

Bruce
Senior Member
Username: Bruce

Post Number: 4220
Registered: 9-2003


Posted on Friday, December 08, 2006 - 9:57 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Interesting I remember that as a defect in the old Brownings ....
Top of pagePrevious messageNext messageBottom of page Link to this message

Wildrat
Senior Member
Username: Wildrat

Post Number: 1169
Registered: 12-2003


Posted on Friday, December 08, 2006 - 10:25 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I would get a magnifying glass and ck for stray wires shorting on your mic wires you soldered, and find another place to get your power. I had a roger beep I installed on a Cobra 2010 base and it did not like the power at the power switch. I don't know why but it didn't, so I put the red wire at another 12vdc point and it was fine.

WR
Top of pagePrevious messageNext messageBottom of page Link to this message

Lonestarbandit
Member
Username: Lonestarbandit

Post Number: 52
Registered: 10-2006


Posted on Friday, December 08, 2006 - 7:31 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

where do i find these key up pings? i desperately want to find a double ping keyup but have had 0 success. any help would be greatly appriciated. i also recall an old cber that had a like a "woosh" sound at key up that was really neat but again 0 success.

Moderator Note!

Go to WWW.GOOGLE.COM
and Type:CB NOISE TOYS in the SEARCH Box
Top of pagePrevious messageNext messageBottom of page Link to this message

Biskybabyusa
Junior Member
Username: Biskybabyusa

Post Number: 11
Registered: 11-2006


Posted on Saturday, December 09, 2006 - 1:19 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I only have the one ping keyup a friend gave me. The ping module didn't like the power at the on/off switch. I found another spot and it works great. I wired in a spst switch into the hot lead so I can turn it on and off instead of being obnoxious all the time. HeHe.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: