Author |
Message |
Airplane1
Advanced Member Username: Airplane1
Post Number: 869 Registered: 5-2004
| Posted on Tuesday, September 26, 2006 - 7:49 pm: |
|
Is there anything that can be put on the threads on the coax connector on the antenna that would keep it from corroding and also keep water out? I am thinking of dialectric grease. AP |
Tech808
Moderator Username: Tech808
Post Number: 11366 Registered: 8-2002
| Posted on Tuesday, September 26, 2006 - 8:09 pm: |
|
Airplane1, Do a search here in the Copper Forum for PENTROX or NOALOX which is designed just for this purpose. Hope this help's, Lon Tech808 CEF808 N9CEF CVC#2 |
Airplane1
Advanced Member Username: Airplane1
Post Number: 870 Registered: 5-2004
| Posted on Wednesday, September 27, 2006 - 7:43 am: |
|
I have that Noalox product for use on the antenna joints but just wanted something on the 259 connector befor I screw coax on. I will do a search but I did not find anything under Noalox befor, I will try again. Roger |
Airplane1
Advanced Member Username: Airplane1
Post Number: 871 Registered: 5-2004
| Posted on Wednesday, September 27, 2006 - 8:11 am: |
|
I found something in the search. It said to use noalox at the 259 connectors also when putting antenna system together. Thanks, Roger |
Duck246
Intermediate Member Username: Duck246
Post Number: 128 Registered: 8-2004
| Posted on Monday, November 20, 2006 - 8:42 am: |
|
Eh.... it will work, however I like anti - seize.. |
Airplane1
Advanced Member Username: Airplane1
Post Number: 929 Registered: 5-2004
| Posted on Monday, November 20, 2006 - 6:04 pm: |
|
thanks guys |