| Author |
Message |
    
Doug
Junior Member
Username: Doug
Post Number: 26
Registered: 12-2001
| | Posted on Monday, August 28, 2006 - 7:32 pm: | 
|
Hi
Does anyone know the wiring code for a d104-m6b handheld mic to a Magnum 257 radio ?
My d104 has
black
white
shield
red
blue
thanks in advance |
Tech808
Moderator
Username: Tech808
Post Number: 10977
Registered: 8-2002
| | Posted on Monday, August 28, 2006 - 7:49 pm: |
|
Doug,
PIN #1 ~ WHITE
PIN #2 ~ BLACK
PIN #3 ~ RED
PIN #5 ~ SHIELD & BLUE
NOTE!
MAKE SURE THAT NO WIRE COMES INTO CONTACT WITH PIN #6
Hope this help's,
Lon
Tech808
CEF808
N9CEF
CVC#2 |
Wd259
New member
Username: Wd259
Post Number: 3
Registered: 10-2006
| | Posted on Sunday, November 05, 2006 - 9:42 pm: |
|
Hi all,
Anyone have the complete wiring for the newer 257 with the up down switch? Info Ihave seen is kinda incoplete. My plan it to put my MC43 on it or something similar. SMall mics grest but the cord poor coiling when cold  Thanks and 73, Dave |
Tech808
Moderator
Username: Tech808
Post Number: 12077
Registered: 8-2002
| | Posted on Sunday, November 05, 2006 - 10:46 pm: |
|
Wd259,
Subscriber (Preview)
» Product Reviews
» Magnum 257 - New
» Review
#1 ~ MICROPHONE INPUT
Pin #1 ~ Microphone Audio / White
Pin #2 ~ Receive / Black
Pin #3 ~ Transmit / Red
Pin #4 ~ Down(Up w/22K Ohm Resistor) / Blue
Pin #5 ~ Ground / Shield w/yellow sleeve
Pin #6 ~ +13.8VDC / Brown
Hope this help's,
Lon
Tech808
CEF808
N9CEF
CVC#2 |
