Author |
Message |
Duck246
Intermediate Member Username: Duck246
Post Number: 118 Registered: 8-2004
| Posted on Sunday, July 09, 2006 - 2:22 am: |
|
What can I do to adjust the frequency counter on the radio so when both clarifiers are at 12 o clock the counters last digit is 0? |
Duck246
Intermediate Member Username: Duck246
Post Number: 119 Registered: 8-2004
| Posted on Tuesday, July 11, 2006 - 4:46 am: |
|
Any idea anyone? |
Dale
Advanced Member Username: Dale
Post Number: 562 Registered: 12-2002
| Posted on Tuesday, July 11, 2006 - 9:46 am: |
|
well first of all ya need an external freq. counter perferbly 7digits cause radio might be right on and the display on radio maybe wrong or visa versa.but ya need an external counter that plugs in thru your coax.also ive seen radios that were off when first turned on but after a 20min warm up they were fine.this maybe the case also |
Duck246
Intermediate Member Username: Duck246
Post Number: 120 Registered: 8-2004
| Posted on Tuesday, July 11, 2006 - 6:36 pm: |
|
no its had many hours to warm up.. I have an external freq counter, I need to know the VR is all.. |
Dale
Advanced Member Username: Dale
Post Number: 570 Registered: 12-2002
| Posted on Tuesday, July 11, 2006 - 9:48 pm: |
|
oic im asuming you know how to use this hae you connected the radio to the external freq. counter cause ones on radio arent always right seen this happen too many times.is the radio new or used? if new id send it in for repair/replace counter the vrs i couldnt seem to finfd anything but ill look some more.im not sure what they are |
Duck246
Intermediate Member Username: Duck246
Post Number: 121 Registered: 8-2004
| Posted on Wednesday, July 12, 2006 - 12:47 am: |
|
The counter is very accurate.. I just need the Variable Resistor number please.. |
Tech808
Moderator Username: Tech808
Post Number: 10507 Registered: 8-2002
| Posted on Wednesday, July 12, 2006 - 8:22 am: |
|
Donald, Never seen the inside of one or used one but if it has the MC145106 PLL try VR7 Connect Frequency counter to TP3 and adjust VR7 with your clarifier set at 12 oclock in USB/LSB mode NOT AM or FM and adjust until both TX and RX are the same. Hope this help's, Lon Tech808 CEF808 CVC#2 |
Hotwire
Senior Member Username: Hotwire
Post Number: 1540 Registered: 1-2005
| Posted on Wednesday, July 12, 2006 - 12:25 pm: |
|
Duck246, Will you let us know if Lon's suggestion works? I have a 4800 with the same issue. |
Duck246
Intermediate Member Username: Duck246
Post Number: 122 Registered: 8-2004
| Posted on Wednesday, July 12, 2006 - 8:08 pm: |
|
VR7 does not adjust the counter.. been there done that. Already checked the copper mods Lon.. Any other ideas? |
Tech808
Moderator Username: Tech808
Post Number: 10515 Registered: 8-2002
| Posted on Wednesday, July 12, 2006 - 8:42 pm: |
|
Donald, Sorry but no other idea's. I have never used, owned, worked on or had any experience with any Connex radio as yet. Maybe one of the Connex owner's in the Forum will read this and have some helpful information. Lon Tech808 CEF808 N9CEF CVC#2 |
Duck246
Intermediate Member Username: Duck246
Post Number: 123 Registered: 8-2004
| Posted on Friday, July 14, 2006 - 5:43 pm: |
|
Thanks lon.. Does anyone else have this information? Certainly the copper tech that does the alignment on these before they are sent out knows it.. Is there a way you can contat him or her lon? I wouldnt even know where to start, can you point me in the right direction? |
Tech808
Moderator Username: Tech808
Post Number: 10534 Registered: 8-2002
| Posted on Saturday, July 15, 2006 - 9:12 am: |
|
Donald, You can contact the Copper Tech by sending an e-mail to: paulm@iglou.com GOOD LUCK as I have only had one e-mail from him in the last 4 years as he just is not a computer person. BEST BET! is to call Copper at:1-800-626-6343 and ask for the Copper Tech Monday thru Friday before Noon. Hope this help's, Lon Tech808 N9CEF CVC#2 |