| Author |
Message |
    
Mike07083
Junior Member
Username: Mike07083
Post Number: 18
Registered: 6-2006
| | Posted on Wednesday, July 05, 2006 - 6:32 pm: | 
|
HELLO...I NEED THE WIREING FOR AN ASTATIC 575 M6 TO THE MAGNUM MINI 30.....TY.....MIKE |
Tech808
Moderator
Username: Tech808
Post Number: 10454
Registered: 8-2002
| | Posted on Wednesday, July 05, 2006 - 6:47 pm: |
|
Mike07083,
PIN #1 ~ GROUND - SHIELD
PIN #2 ~ AUDIO - WHITE
PIN #3 ~ TRANSMIT - RED
PIN #4 ~ RECEIVE - BLACK
NOTE!
I would highly recommend using ONLY the STOCK mic on the Mini Mag as it was designed to give Maximum Performance from the Mini Mag.
If you use any mic other than the Faactory Stock Mic that was designed for the Mini Mag you may see a BIG loss in output power.
Hope this help's,
Lon
Tech808
CEF808
N9CEF
CVC#2 |
Mike07083
Junior Member
Username: Mike07083
Post Number: 19
Registered: 6-2006
| | Posted on Wednesday, July 05, 2006 - 9:40 pm: |
|
QUESTION: WHY WOULD THE ADDITION OF A POWER MIC ON THIS RADIO CUZ THE POWER TO DROP? WOULD THE ASTATIC 636 BE A BETTER MIC BEING THAT IT IS NON-POWERED?? ANY HELP WILL BE HELPFUL.....TY.....MIKE |
Tech808
Moderator
Username: Tech808
Post Number: 10458
Registered: 8-2002
| | Posted on Wednesday, July 05, 2006 - 10:32 pm: |
|
Mike07083,
The STOCK Mic will work the best.
The MINI MAG was DESIGNED to work at 100% with the STOCK MIC.
In testing it here for the Review I had a loss of from 6 to 10 watts OUTPUT when trying to use after market mics and even other Magnum Mics.
So I called Sam Lewis and asked what is going on and he said the MINI MAG MIC is designed to work with the MINI MAG ONLY and NO OTHER Mic is going to allow the MINI MAG to reach 100% performance.
Very much like the K40 Radio's.
So I simply have followed his advice since he is the one who designed it and know's what will and will not work with his radio's.
And he was 100% CORRECT 
Lon
TEch808
CEF808
N9CEF
CVC#2 |
