| Author |
Message |
    
vernonott
| | Posted on Sunday, June 10, 2001 - 12:03 pm: | 
|
307 : If you need your system total coax ohms to be 52 ohms , should you check it starting at the jumper through the driver ,through the amp,through the Dosy ,through the antenna? Or should you just check it through the coax through the antenna and not worry about the rest? |
307 (307)
| | Posted on Sunday, June 10, 2001 - 3:54 pm: |
|
Look at it from the antenna point at the end , never look through jumpers and equipment , they are never exactly 52 ohms unless you have really good stuff like Yaesu or Kenwood. You can look through the coax as well but not the other stuff. It can throw you way off... |
|
