Author |
Message |
Allan
Intermediate Member Username: Allan
Post Number: 167 Registered: 2-2006
| Posted on Saturday, June 17, 2006 - 10:12 pm: |
|
I have an older transistorized (mid '70's) and tho I do still have the owners manual for it, there is no mention of what class it was built for. It does have the SSB delay, but.... I cannot find the TRW #'s (maker of the 2 transistors) listed anywhere to see if they are truely SSB devices. Is there any tell-tale signs to look for in there to "give the expert eye" any clue to it being a class C type or biased for sideband, or would a schematic of it be the only source ? Just curious. Thanks :-/ |
Allan
Intermediate Member Username: Allan
Post Number: 168 Registered: 2-2006
| Posted on Sunday, June 18, 2006 - 5:48 pm: |
|
Any takers? |
Coyote
Advanced Member Username: Coyote
Post Number: 781 Registered: 11-2004
| Posted on Monday, June 19, 2006 - 9:10 am: |
|
Allan, What's the make and model. You could open it up and check the numbers on the transistors and then run a google on them. You may find the complete data sheet for those transistors which will tell you what you want to know. |
Allan
Intermediate Member Username: Allan
Post Number: 169 Registered: 2-2006
| Posted on Monday, June 19, 2006 - 6:34 pm: |
|
I cannot find the TRW #'s (maker of the 2 transistors) listed anywhere to see if they are truely SSB devices. (Remember?) On them are stamped...TRW PT9803 & below that...7630V...... Can't find anything on 'em....It is a 100 watt AM (and will do it easy) made by Digital Sport Systems. Model #1010. On AM it is a real clean talker, but have yet to try it on a SB rig. I have an old '70's (NOS/SIIOB) Motorola CB550 40 ch I would like to hook it up with, but do not want to go through all the hassle hooking it up if it is going to sound distorted on SB. Just doing a little research before I attempt it. Thanks..... A |
Rldrake
Intermediate Member Username: Rldrake
Post Number: 176 Registered: 1-2006
| Posted on Tuesday, June 20, 2006 - 7:52 pm: |
|
If an amplifier is truly linear it will work well using any mode. SSB is still amplitude modulation with one sideband and the carrier suppressed.
|
Allan
Intermediate Member Username: Allan
Post Number: 171 Registered: 2-2006
| Posted on Tuesday, June 20, 2006 - 9:35 pm: |
|
Roger that.... |