Copper Talk » Ask The Tech » Modifications » MAGNUM S-9 « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Mike07083
New member
Username: Mike07083

Post Number: 3
Registered: 6-2006
Posted on Saturday, June 17, 2006 - 11:00 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

HELLO ALL...I WOULD LIKE TO BUY A MAGNUM S-9 FROM COPPER ELECT. I SEE THAT THEY OFFER AN "EXPAND AND TUNE" FOR AN ADDITIONAL $30.00...MY QUESTION IS WILL THEY EXPAND THE FREQUENCY OF THE RADIO,AND WHAT WILL IT BE, AND WHAT WILL THEY TUNE THE RADIO OUTPUT POWER TO?? WILL THEY PEEK THE RADIO TO ITS FULL POTENTIAL AS FAR AS THE OUTPUT POWER GOES?? WHAT WILL BE THE POWER OUTPUT ON AM,FM,SSB ?? THANK YOU.....MIKE
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech808
Moderator
Username: Tech808

Post Number: 10320
Registered: 8-2002


Posted on Saturday, June 17, 2006 - 1:55 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Mike07083,

Export Mode:
This mode is pre-set to 8 Bands between 25.615 MHz - 29.205 MHz. The jumper setting for this mode is JP1 = ON JP2 = OFF JP3 = OFF JP4 = ON.

The Copper Tech will align the area's below.

• RX (Receive) alignment per manufacturer specifications
• TX (Transmit) alignment per manufacturer specifications
• PLL Synthesizer alignment per manufacturer specifications




S-9 REVIEW CLICK HERE! for MORE INFORMATION on the Magnum S-9

Hope this help's,

Lon
Tech808
CEF808
N9CEF
CVC#2
Top of pagePrevious messageNext messageBottom of page Link to this message

Dave1
Intermediate Member
Username: Dave1

Post Number: 120
Registered: 9-2005


Posted on Sunday, July 16, 2006 - 10:48 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

what Power Microphone would you recomend I use on the S9 for base use right now I only have the stock one on it or would a power Microphone be too much

Dave1
Top of pagePrevious messageNext messageBottom of page Link to this message

Patzerozero
Senior Member
Username: Patzerozero

Post Number: 3103
Registered: 7-2004


Posted on Sunday, July 16, 2006 - 10:31 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

i use a shure 526t or turner +2 with EXCELLENT results. last nite, DXing all over IN, IL & TN with it at 9dk/38PEP from my base, with my son's dm452, ALL the regulars thought i was in my mobile
Top of pagePrevious messageNext messageBottom of page Link to this message

20mg355
Junior Member
Username: 20mg355

Post Number: 25
Registered: 6-2004


Posted on Monday, July 17, 2006 - 8:26 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Well I use a Turner +3 and a Turner JM+2/U on my Magnum S9. Really vintage stuff, but sounds great :-)
Top of pagePrevious messageNext messageBottom of page Link to this message

Dave1
Intermediate Member
Username: Dave1

Post Number: 121
Registered: 9-2005


Posted on Monday, July 17, 2006 - 9:21 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I have a few Tuners around here A few Sidekicks and a +2 I just bought a +3 from that online auction for $18.50 so it looks like im all set

thanks for your input
Dave1
Top of pagePrevious messageNext messageBottom of page Link to this message

Hotwire
Senior Member
Username: Hotwire

Post Number: 1558
Registered: 1-2005
Posted on Monday, July 17, 2006 - 12:26 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Some say that the stock mic is the best mic to use on the S9. When I get my s9, waiting on the new model I'll will probably try the Astatic 636 for mobile or the JCD mic for base. An opinion of course but I feel that the S9 has plenty of modulation the way it is and with it having a modulator and compressor built in a power mic might be a waste of time.
Top of pagePrevious messageNext messageBottom of page Link to this message

Moonshinner
Junior Member
Username: Moonshinner

Post Number: 10
Registered: 7-2004
Posted on Monday, July 17, 2006 - 1:59 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I've got a S9 and run a stock mick on one side an a D-104 on the other side,other than just dont overdrive the audio i get a different sound tone and more audio from the power mike,its all up to what want out of the radio,,try it both way and get a audio ck.and go from there,.And you can also ck it on a O scope to see the audio pattern....73's
Top of pagePrevious messageNext messageBottom of page Link to this message

Patzerozero
Senior Member
Username: Patzerozero

Post Number: 3111
Registered: 7-2004


Posted on Monday, July 17, 2006 - 4:24 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

the omega & delta use a 'powered' factory mic. it is TOUGH to improve on their 'stock' sound with ANY mic! the S9 isn't powered, finding the right balance with the topgun gets some awesome audio.
Top of pagePrevious messageNext messageBottom of page Link to this message

Chad
Advanced Member
Username: Chad

Post Number: 993
Registered: 11-2004


Posted on Tuesday, July 18, 2006 - 9:17 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Same with the '257 Don't change the mic!!!!! They are fine electret mic capsules with a frequency response FAR beond of what the radio is capable of, the response is then talored for voice RF use. I have had nothing but glowing reports with the stock arrangement.

Chad
Top of pagePrevious messageNext messageBottom of page Link to this message

Capt205
Intermediate Member
Username: Capt205

Post Number: 117
Registered: 5-2005
Posted on Tuesday, July 18, 2006 - 10:14 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I use a Turner plus 3 with the S9 base, and a Turner RK76 with the S9 mobile. I like those Turners...I also have a Turner plus 3b on the Cobra 2000.
Top of pagePrevious messageNext messageBottom of page Link to this message

Wildrat
Advanced Member
Username: Wildrat

Post Number: 956
Registered: 12-2003


Posted on Tuesday, July 18, 2006 - 12:18 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

When I bought my radio from Copper and had the tuning done to the radio for more money they did the channels ( which you can do easily by yourself if you can read), the tuning was done also. When my radio blew a cap and I had warranty work done to it at a authorized repair shop that Sam at Magnum told me to send it too, when they sent the radio back they had a note on it saying they had realign the Rec. and Transmit. So if I were you I would keep the money for the tune and do the channels yourself. If you need any other help, there is plenty of it here from the members. For that 30 bucks you could get a decent noise cancelling mic to go with the radio. You live in Tampa, we have talked from time to time. Yes, there are those that love the stock mic, they are also the ones that tell us Para dynamics makes a good low pass filter. The stock mic is OK if you want a stock mic sound. I am using my 636L now and I like it as long as I can keep the rubber on the lip. I would not use a power mic, you will be louder like I was and people will tell you how loud you are but never say a word of how bad it sounds. That happenened to me, everyone told me how good I sounded, then I find out these moron's think a car running on 1 cylinder sounds good. The S9 is an excellent radio.
WR
Top of pagePrevious messageNext messageBottom of page Link to this message

Dale
Advanced Member
Username: Dale

Post Number: 577
Registered: 12-2002
Posted on Monday, July 24, 2006 - 1:14 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

my local has a older delta with a silver eagle on it sounds awsome not overmodulation at all
Top of pagePrevious messageNext messageBottom of page Link to this message

Arnie
New member
Username: Arnie

Post Number: 3
Registered: 3-2004
Posted on Thursday, March 20, 2008 - 5:46 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

magnum s9 the freq.counter jumps around will not lock on freq.????
Top of pagePrevious messageNext messageBottom of page Link to this message

Kabar
Member
Username: Kabar

Post Number: 62
Registered: 6-2003
Posted on Thursday, March 20, 2008 - 1:31 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Does the frequency counter jump around on transmit or receive or both?
Sometimes if an amplifier is mounted too close to the radio the frequency counter becomes unstable on transmit and displays different frequencies.If this is the case move the amplifier away from the radio.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: