Author |
Message |
615_ri
New member Username: 615_ri
Post Number: 1 Registered: 5-2006
| Posted on Thursday, May 25, 2006 - 12:26 am: |
|
hey guys, been a long time veiwer. im 19 out of bristol ri, i currently have a voyage vr9000 that ive owned for 4 years, a d104-m6b handheld, and a shakespear abs 1600. i did the mpc-rc mod today and im dead keying 1 watt and swinging 20. i tried turning vr16 bhut that did nothing. what is the correct pot to turn, ive read in another post that big bob said "In my eagle 2000 vr-16 adjusts the cw keying output,the actual low power adj. is rv-501 I believe on a little board behind the front panel right behind thr rf power nob" is that true? |
Moonraker
Intermediate Member Username: Moonraker
Post Number: 205 Registered: 3-2005
| Posted on Thursday, May 25, 2006 - 7:46 pm: |
|
I think the vr9000 is the same as a galaxy 88. If so VR 16 is the am/fm low power and vr 18 is the am/fm high power. Hope this helps. |
Tech808
Moderator Username: Tech808
Post Number: 10096 Registered: 8-2002
| Posted on Thursday, May 25, 2006 - 7:58 pm: |
|
615_ri, WELCOME TO THE COPPER FORUM! Did you do the NPC-RC Modification listed here in the Copper Forum? It is located in the area titled: Subscriber (Preview) » Tips and Tricks » Voyage VR9000 NPC-RC Modification » NPC-RC Modification All of the step by step instruction's and information are listed there for the modification with PLENTY of Great Pictures of the Complete Modification. Hope this help's, Lon Tech808 CEF808 N9CEF CVC#2 |
615_ri
New member Username: 615_ri
Post Number: 2 Registered: 5-2006
| Posted on Thursday, May 25, 2006 - 8:06 pm: |
|
ya, i did the mod right from the site but vr 16 seems to do nothing |
Dale
Intermediate Member Username: Dale
Post Number: 425 Registered: 12-2002
| Posted on Friday, May 26, 2006 - 12:15 pm: |
|
sounds like the vr16 or amc is disabled.i hsad a radio like that took 2 my shop thats what the problem was.pretty much same as clipping limiter but this way limiter still stays intact.but still causes overmodulation |
615_ri
New member Username: 615_ri
Post Number: 3 Registered: 5-2006
| Posted on Friday, May 26, 2006 - 1:13 pm: |
|
so clipign r234 or whatever it is disabled my low power pot? |
615_ri
New member Username: 615_ri
Post Number: 5 Registered: 5-2006
| Posted on Sunday, May 28, 2006 - 12:25 pm: |
|
well, i tried to fix it, i need a chematic for it because i think i screwed up a solder joint putting tp7 back. |
615_ri
New member Username: 615_ri
Post Number: 6 Registered: 5-2006
| Posted on Monday, May 29, 2006 - 2:10 am: |
|
what should i do? im kind of desperate I MISS MY RADIO |