Author |
Message |
Hotwire
Senior Member Username: Hotwire
Post Number: 1229 Registered: 1-2005
| Posted on Monday, April 24, 2006 - 1:41 pm: |
|
Sometimes when I turn it on it acts funny. It powers on but i get no recieve unless real close and the same for transmit. Its like it goes off freq. Now if I switch it off and on real fast a few times it will come on and work great as normal. I have tried different mics and antennas. My 148nwst did the same thing for a short time and then stopped. Cold solder joint maybe? Anyone else own a newer 148 GTL with similar issue? |
Patzerozero
Senior Member Username: Patzerozero
Post Number: 2772 Registered: 7-2004
| Posted on Monday, April 24, 2006 - 5:33 pm: |
|
yup, most likely that famous ole cold solder joint syndrome. where though... try leaving the covers unscrewed, next time it happens, very carefully remove the covers & try pushing on the board with a pencil, or wooden dowel & see if things 'POP' back to normal. then, hit all the joints in that area with a hot solder gun & see if you find the bad spot. |
Hotwire
Senior Member Username: Hotwire
Post Number: 1235 Registered: 1-2005
| Posted on Tuesday, April 25, 2006 - 1:00 pm: |
|
Cool! I give that a try Pat. thanks |