| Author |
Message |
    
Allagator
Advanced Member
Username: Allagator
Post Number: 726
Registered: 9-2002
| | Posted on Tuesday, March 28, 2006 - 4:32 pm: | 
|
I traded a nonworking radio for a like new Yaesu FT-2800M and i cant get the numbers on the mic fo work rite at all ! but it keys fine and recives fine but i cant reprogram it for the local repeter ! any ideas on where i can find a new mic to see if it works or if its in the radio !
Thanks !!!!
Allagator
CEF 115 |
Tech808
Moderator
Username: Tech808
Post Number: 9587
Registered: 8-2002
| | Posted on Tuesday, March 28, 2006 - 4:41 pm: |
|
Allagator,
Right now I have no idea where my owners manual is but maybe Moderator136 or Karatebutcher can post the mic wiring later for you and you can use any mic to test it.
Lon
Tech808
CEF808
N9CEF
CVC#2 |
Karatebutcher
Senior Member
Username: Karatebutcher
Post Number: 2103
Registered: 7-2002
| | Posted on Tuesday, March 28, 2006 - 5:16 pm: |
|
Lon the manual shows know wireing of mike. |
Tech291
Moderator
Username: Tech291
Post Number: 382
Registered: 11-2004
| | Posted on Tuesday, March 28, 2006 - 7:44 pm: |
|
from page 10 of the ft-2800m manual;
1.mic sw2
2.mic sw1
3.+8vdc
4.gnd
5.mic audio
6.ptt/clone
the manual is available in adobe pdf format at;
ft2800m(706.31kb)
hope this helps
TECH291
CEF#291/CVC#6
KC8ZPJ |
Karatebutcher
Senior Member
Username: Karatebutcher
Post Number: 2104
Registered: 7-2002
| | Posted on Tuesday, March 28, 2006 - 9:11 pm: |
|
I see now mine is on page 10. |
Allagator
Advanced Member
Username: Allagator
Post Number: 729
Registered: 9-2002
| | Posted on Thursday, April 27, 2006 - 8:25 pm: |
|
LOL !!!! THANKS GUYS ! LOL BUT IT WAS ME THAT FORGOT ABOUT THE LOCKOUT ON THE MIC !
THANKS AGAIN !
ALLAGATOR !
CEF115 |
Rldrake
Intermediate Member
Username: Rldrake
Post Number: 166
Registered: 1-2006
| | Posted on Tuesday, June 06, 2006 - 10:57 am: |
|
On the little 2800...the mic is not used for programming repeater pairs, CT access tones, or frequencies into the channel memory bank.
All those functions are done using the set menus and the control buttons on the face of the transceiver/contol head. |
Al_lafon
Intermediate Member
Username: Al_lafon
Post Number: 225
Registered: 3-2005
| | Posted on Monday, September 25, 2006 - 4:42 pm: |
|
Don't feel bad i had a friend get his IC-706 so
out of wack he had to do a full reset to get it
back and sounding good he played to much in the
menu's
73's Al |
