Author |
Message |
Af579
Member Username: Af579
Post Number: 53 Registered: 6-2003
| Posted on Sunday, March 19, 2006 - 4:34 pm: |
|
Anyone done the erf-2030 mod on the 2950dx yet? I can't get more then 10 watts out. I followed the directions to a tee that were posted here somewhere. That is less power then what I had with the 2sc-2312's. |
Af579
Member Username: Af579
Post Number: 55 Registered: 6-2003
| Posted on Wednesday, March 22, 2006 - 5:01 pm: |
|
gezzz and these used to be popular radios. Anybody? |
Af579
Member Username: Af579
Post Number: 56 Registered: 6-2003
| Posted on Wednesday, March 29, 2006 - 6:47 pm: |
|
humm ok any tech's on here who actually work on radios I could possibly send this to to either fix the conversion or put it back to spec? I also have an omegaforce s45 i bought to use since the 2950dx was out of service and it has an rx problem that I need fixed also. Thanks rich |
Af579
Member Username: Af579
Post Number: 58 Registered: 6-2003
| Posted on Friday, April 28, 2006 - 10:59 pm: |
|
bringing this back up. Anyone try it yet on this rig? |
Hotwire
Senior Member Username: Hotwire
Post Number: 1259 Registered: 1-2005
| Posted on Sunday, April 30, 2006 - 12:14 pm: |
|
WOW! Talk about the cold shoulder! Wish I could help you Rich. Can anyone help this guy out a little? Somebody knows just takes time I guess. |
Af579
Member Username: Af579
Post Number: 60 Registered: 6-2003
| Posted on Monday, May 01, 2006 - 3:17 pm: |
|
yea same one lon posted some time ago. |
Af579
Member Username: Af579
Post Number: 63 Registered: 6-2003
| Posted on Monday, May 22, 2006 - 5:36 pm: |
|
just bringing back to the top in case someone has done this mod. |
Dale
Intermediate Member Username: Dale
Post Number: 411 Registered: 12-2002
| Posted on Tuesday, May 23, 2006 - 8:03 am: |
|
i got an older 2950 with 2/1969s in it and at least one died so this here is interesting cause i was thinking about repacing mine with a single 2030/or even a single 2290 being the oringal ones are dead.went 2 local cb butcher shop yesterday and of course they tried 2 get me 2 just buy a whole new radio |
Bendare2
Junior Member Username: Bendare2
Post Number: 15 Registered: 8-2004
| Posted on Tuesday, May 23, 2006 - 10:40 am: |
|
Try a 'companion' part on each final instead of sharing one between the two...... I've seen improvement with that addition......?? One en369fn on each 2030....eh? That's all I have right now....Ol'Ben |
Af579
Member Username: Af579
Post Number: 64 Registered: 6-2003
| Posted on Monday, June 26, 2006 - 5:29 pm: |
|
humm did that as per modification spec. each 2030 had its own companion part. I don't know. Looks like it will be sitting on the shelf for a good while. |
Af579
Member Username: Af579
Post Number: 66 Registered: 6-2003
| Posted on Tuesday, September 26, 2006 - 10:34 am: |
|
Ok folks it has been a good while. Anyone had any luck with this upgrade? Someone has to have done one of these by now <lol> |
Af579
Member Username: Af579
Post Number: 67 Registered: 6-2003
| Posted on Tuesday, October 17, 2006 - 7:43 pm: |
|
those are the directions I used. Didn't work :-( I can't believe no one has done one of these radios. |
Therealporkchop
Advanced Member Username: Therealporkchop
Post Number: 919 Registered: 11-2002
| Posted on Wednesday, October 18, 2006 - 2:18 am: |
|
This seems to be typical for this modification. I experienced the same problem with it and never got it to work. So the best thing I can tell you to do is put your radio back like it was. The few PEP watts that you will actually see if you ever get it to work aren't worth all the effort. |