Copper Talk » Ask The Tech » Antennas » Wanting to build a great antenna for a weather radio. « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Chad
Advanced Member
Username: Chad

Post Number: 726
Registered: 11-2004


Posted on Monday, March 13, 2006 - 11:44 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Well folks, it's storm season. I life in the sticks in the tornado belt and a few communities near me got hit last night. I have a Midland WR-100 weather alert radio that accepts an external antenna.

I would like to place an external antenna in the loft of my home and feed 2 identical radios with it. I have one radio on the main level of the home and would like to purchase another for the basement where the bedrooms are located.

I had an old mag mount antenna that I placed on top of the kitchen cabinent, it came from an old GE Emergency CB radio and had an RCA connector on it that fit the weather radio. It works OK but would like something better. The built in antenna does not so well and is always in the way in the kitchen.

The frequency that is used in my area is 162.550 Mhz. I would assume a directional antenna would be rather small.

I also do not know the impedance of the antenna input of the radio, it is not in the manual or specs, If anyone knows of this type of situation or has done this before please chime in. the one purchased for the basement will not be able to receive down there. I plan to run coax down thru the walls while i am doing a remodel. I'm also assuming a small low loss coax would work best correct?

Just trying to keep the family safe as there is no sirens within miles of me.

Chad
Top of pagePrevious messageNext messageBottom of page Link to this message

Bruce
Senior Member
Username: Bruce

Post Number: 3637
Registered: 9-2003
Posted on Monday, March 13, 2006 - 1:33 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

a RINGO or a J-Pole should work just fine. Mount them high enough to clear the house feed with good mini-8 and you should be good to go.
Top of pagePrevious messageNext messageBottom of page Link to this message

Hollowpoint445
Senior Member
Username: Hollowpoint445

Post Number: 1136
Registered: 6-2004
Posted on Monday, March 13, 2006 - 9:17 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

How is your reception in the loft? The reason I ask is that you probably don't need a directional antenna. I get three different NOAA weather radio stations where I live with a discone in my attic. An improvised 1/4 wave groundplane would be my first try. Impedance really isn't much of an issue for reception. I'd guess that either 50 or 75 ohm coax will work just fine. Because of that I'd suggest RG6 because of it's excellent shielding and inexpensive 75 ohm splitters and amplifiers.
Top of pagePrevious messageNext messageBottom of page Link to this message

2ir473
Member
Username: 2ir473

Post Number: 76
Registered: 7-2002
Posted on Monday, March 13, 2006 - 9:31 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I run a Midland WR-300 and share an antenna with my scanner. The antenna is a simple Radio Shack 20-176 V/UHF antenna, costs about $25.
I split the antenna feed to the two radios using a cable TV splitter, rated for 1300 mhz.
Since the splitter uses video f-connectors, I use an f-bnc adapter for the scanner, and an f-RCA (phono plug) for the back of the weather radio. It works well and shows no insertion loss.
Your weather radios could be fed with RG-6 or RG-8 coax.
Top of pagePrevious messageNext messageBottom of page Link to this message

Chad
Advanced Member
Username: Chad

Post Number: 727
Registered: 11-2004


Posted on Tuesday, March 14, 2006 - 9:22 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Great news, thanks guys! Reception in the loft is great, it's a log home with very little metal. The main level unit sits right on the counter next to the microwave and the antenna gets in the way when extended. Even extended reception is iffy. I was concerned about getting alerts (S.A.M.E. equipped) so I added a makeshift unit as described. I'm certainly happy that splitting will be easier than thought! I'll give it a shot this weekend.

Again, thanks!

Chad
Top of pagePrevious messageNext messageBottom of page Link to this message

Wildrat
Advanced Member
Username: Wildrat

Post Number: 833
Registered: 12-2003


Posted on Wednesday, March 15, 2006 - 8:51 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I don't think the weather radio cares what kind of antenna it has. I just had a piece of wire around ten feet long on one, it got like three stations also. The reason the wire was around ten feet long is because that was the first piece of wire I grabbed out of my wire box. Real Scientific.
Top of pagePrevious messageNext messageBottom of page Link to this message

Yankee
Senior Member
Username: Yankee

Post Number: 1101
Registered: 7-2003
Posted on Thursday, March 16, 2006 - 6:35 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

All I know is that my 2 meter antennas work great on a weather radio, I also have a two meter J-pole home built that does wonders on a weather radio, the other antenna being a factory 5/8 over 5/8 wave, 9 foot tall overall and is a ground plane. An A-99 or IMAX-2000 will even work with the weather radio, a scanner or weather radio isn't that fussy about an antenna.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: