Author |
Message |
Wildrat
Advanced Member Username: Wildrat
Post Number: 821 Registered: 12-2003
| Posted on Friday, March 10, 2006 - 11:17 am: |
|
I got my radio back from having warranty work done. Since the radio does not have the Copper seal on it anymore I decided to take the cover off and look at the board. On the circuit side I saw where a piece of copper foil was soldered to the board with small standoffs and they had some foam tape under the foil to prevent contact with the board. It was done after the radio was built because it's an ugly job/mod whoever did it. The foil is about 3 X 5 inches in size. Anyone know what this may be for? |
Tech808
Moderator Username: Tech808
Post Number: 9441 Registered: 8-2002
| Posted on Friday, March 10, 2006 - 12:34 pm: |
|
Wildrat, If anything was added or modified in your radio it may have been added / modified when you sent it in for warranty repair work to **** ** as you stated in your other post. Sorry but I have no idea what it could be. Lon Tech808 CEF808 N9CEF CVC#2 |
Wildrat
Advanced Member Username: Wildrat
Post Number: 823 Registered: 12-2003
| Posted on Friday, March 10, 2006 - 4:29 pm: |
|
I was thinking it was something for interference or something. I don't know when it was done. I figured it was done after manufacturing, not at **** **. I have seen where they do things like this with wire jumpers on the board where a trace was bad but this just looks kinda funky. Maybe someone else that has cracked their radio open has seen this foil and may know more about it. |
Dd18
Member Username: Dd18
Post Number: 76 Registered: 11-2004
| Posted on Friday, March 10, 2006 - 4:47 pm: |
|
any chance of sending in a photo of this...? |
Wankle
Junior Member Username: Wankle
Post Number: 13 Registered: 5-2003
| Posted on Friday, March 10, 2006 - 5:43 pm: |
|
wildrat, I opened my and there is no copper tape in my. Please take a pic and show us |
Tech808
Moderator Username: Tech808
Post Number: 9444 Registered: 8-2002
| Posted on Friday, March 10, 2006 - 7:35 pm: |
|
Wankle, The Copper Warranty Seal is NOT placed Inside the radio it is placed on the Outside of the radio over both the Top and Bottom case covers. And the Copper Warranty Seal is ONLY placed on a Radio if you pay for the Copper Tech to do the Expand, align and tune: OPTION The Copper Tech does not Clip or Remove or Add any components and he will make NO adjustments that would Void anyones Factory Warranty. Lon Tech808 CEF808 N9CEF CVC#2 |
Moonraker
Intermediate Member Username: Moonraker
Post Number: 174 Registered: 3-2005
| Posted on Friday, March 10, 2006 - 9:17 pm: |
|
I think wankle was referring to the piece of copper "foil" that wildrat found in his. |
Wildrat
Advanced Member Username: Wildrat
Post Number: 824 Registered: 12-2003
| Posted on Sunday, March 12, 2006 - 9:53 pm: |
|
I will take a pic and get it up as soon as possible, maybe tomorrow morning, don't hold your breath though. |