| Author |
Message |
    
Rosco
| | Posted on Wednesday, December 19, 2001 - 9:47 pm: | 
|
The radio puchased from copper on 10/22/01, was working fine, but now it won't key up. I key the mike, the on air light comes on, no swing, if I key when recieving signal, the meter needle swings to the left, and wont swing or key up to the right, no modulation. Your opinion before i return it to copper to be repaired. Thanks Rosco, Indiana. |
Taz
| | Posted on Thursday, December 20, 2001 - 8:52 am: |
|
did you do the channel mod to it?
see if you cleaned off the solder well enough |
307
| | Posted on Thursday, December 20, 2001 - 10:58 am: |
|
Rosco...Read your personal email I sent you...
307 |
Rosco
| | Posted on Thursday, December 20, 2001 - 12:59 pm: |
|
Thank you taz, and a special thank you to 307. The only thing I did was turn am power to 4 watts, nothing more. Thank you. rosco |
Taz
| | Posted on Friday, December 21, 2001 - 8:35 pm: |
|
sweet
tell me how u like it |
Beatle
| | Posted on Friday, December 21, 2001 - 6:52 am: |
|
Would like to know where Imight find replacement faceplates for a connex 3300hp? THANK YOU. MERRY XMAS TO ALL. |
Honkytonkman593
| | Posted on Thursday, December 20, 2001 - 5:24 pm: |
|
sounds like you pulled the mike to hard or something of that nature. try another mike and make sure its not on the "pa" setting if it has it on your model !! did this with my rci 2980 and it had me baffelled for a week why it wouldnt talk!!! if not might be just a cold solder joint on the voltage regulator or driver. hey good luck keep us informed |
Rosco
| | Posted on Saturday, December 22, 2001 - 12:04 am: |
|
593 thanks for your input. I tried different mikes still didn't work. I am sure it wasn't on PA . Will keep you imformed. Thank you...rosco |
Skynet
| | Posted on Saturday, December 22, 2001 - 9:04 am: |
|
Hi ALL, I recently bought a used Melaka and noticed when the radio is turned off I can hear a hum??? Does anytone have any idea why I would be hearing a hum?
Dave |
Rosco
| | Posted on Sunday, December 23, 2001 - 4:30 pm: |
|
If I remember right my galaxy melaka has a small hum also, when turned off, Maybe a power supply transformer, maybe not sure. Rosco |
Honkytonkman593
| | Posted on Sunday, December 23, 2001 - 7:58 pm: |
|
yup just power supply hum. power supply always on unless you unplug it from the wall. 60 hrtz ac hum. nothing to worry about. computer makes the same noise at times too. |
Skynet
| | Posted on Tuesday, December 25, 2001 - 10:02 pm: |
|
Thanks for input guys, one last question:
I adjusted the AM power to full output by turning it clockwise (the right) but when adjusting the SSB and speaking a steady "Audio" into the mic I couldn't see the power reading on my meter increase or decrease as I adjusted the SSB.
So I guess my question to you is: If the AM power was increased by turning clockwise would it be logical to assume the by turning the SSB
clockwise I am also increasing power?
I feel a little silly even asking but I've never run accross this problem before. |
Taz
| | Posted on Wednesday, December 26, 2001 - 2:14 pm: |
|
does your meter have the ssb option on it? |
|
