| Author |
Message |
    
Big_rigger
Junior Member
Username: Big_rigger
Post Number: 28
Registered: 8-2005
| | Posted on Saturday, February 04, 2006 - 12:34 pm: | 
|
anybody know how to install in a cobra 29 classic |
Patzerozero
Senior Member
Username: Patzerozero
Post Number: 2360
Registered: 7-2004
| | Posted on Saturday, February 04, 2006 - 4:32 pm: |
|
brown(or red) wire AND a 1/2 watt 1K resistor to 12 volt point while radio is in XMIT (you'll need a VOM to find it.)
black wire to ground.
remove the wire from #2 pin inside radio at mic socket(should be white)
hook the white wire from board labeled input to the socket.
hook the white wire from board labeled output to the LOOSE wire you removed from the socket earlier.
hook both shield wires to a ground.
mount control.
if colors are different....try to post a pic or give me an idea what each color goes to on robot board. it's very straightforward really....
|
Big_rigger
Junior Member
Username: Big_rigger
Post Number: 30
Registered: 8-2005
| | Posted on Saturday, February 04, 2006 - 11:02 pm: |
|
thanks patzero |
