| Author |
Message |
    
Cbkidd1
New member
Username: Cbkidd1
Post Number: 1
Registered: 4-2005
| | Posted on Wednesday, January 04, 2006 - 9:15 pm: | 
|
just got a galaxy 95t two weeks ago from copper. i had the expand align and tune done. when i talk people tell me i sound muffled with the stock mic and with a power mic.tryed to turn the mic gain down but when i do i lose wattage and my modulation.with stock mic and rf power turned down i key 5 watts and swing 125. and my modulation is way over 150 precent can't use the radio like this. what should i do? thank's |
Tech808
Moderator
Username: Tech808
Post Number: 8877
Registered: 8-2002
| | Posted on Thursday, January 05, 2006 - 6:24 pm: |
|
Cbkidd1,
WELCOME TO THE COPPER FORUM!
If you are Over Modulating BACK away from the Mic and/or turn you mic gain DOWN.
You should be able to reach 100% modulation if you are using 5 watts or 500 watts.
And if you are overmodulated then the more power/mic gain you use the worse it sounds and splatters and distorts what you are trying to say.
Different people have different voices / tone of voice and need to make different adjusments when using different Radios/Mics.
The Mic settings I use on My mics do not work for the 1st Sargant and she has her own mics to usde on the same radios that I use and vice versa.
Hope this helps,
Lon
Tech808
CEF808
N9OSN |
Cbkidd1
New member
Username: Cbkidd1
Post Number: 2
Registered: 4-2005
| | Posted on Friday, January 06, 2006 - 3:23 pm: |
|
hi tech. my wattage also drops off when i turn my mic gain down like it is working off of the mic gain. should i just turn the rf power up to get back the wattage i lost? and also when you guys do the align and turn do you clipp the mod limiter to get it to swing . was thinking maybe thats what is makeing it over modulat on the stock mic. thank you for your help. |
Road_warrior
Senior Member
Username: Road_warrior
Post Number: 1135
Registered: 7-2004
| | Posted on Friday, January 06, 2006 - 8:43 pm: |
|
If it were I, I would contact Coppers and
ask if you can discuss your problem with there Tech. As it should not be muffled no matter
where Mic gain is set with a stock mic. |
Tech808
Moderator
Username: Tech808
Post Number: 8882
Registered: 8-2002
| | Posted on Friday, January 06, 2006 - 9:43 pm: |
|
Cbkidd1,
Call Copper at 1-800-626-6343 Monday thru Friday and ask for Customer Service or the Copper Tech.
The Copper Tech DOES NOT CLIP or REMOVE ANYTHING and everything is 100% intact as it was when the radio left the factory.
When someone receives a radio from Copper they can be assured that it is set 100% to Factory Specs if the Copper Tech does the work and it will NOT void your Factory Warranty.
Also none of the Copper Forum Techs work for or are employed by Copper Electronics as we all just donate our time to help when and where we can here on the Copper Forum.
Hope this helps,
Lon
Tech808
CEF808
N9OSN |
Wildrat
Advanced Member
Username: Wildrat
Post Number: 695
Registered: 12-2003
| | Posted on Sunday, January 22, 2006 - 7:38 pm: |
|
Whatever happened with this one? I am interested!
Mark |
Tech808
Moderator
Username: Tech808
Post Number: 9056
Registered: 8-2002
| | Posted on Sunday, January 22, 2006 - 11:40 pm: |
|
Wildrat,
Since he has not logged back in or posted I would guess he has had his problem taken care of.
Lon
Tech808
CEF808
N9OSN |
