| Author |
Message |
    
Purplehaze
Member
Username: Purplehaze
Post Number: 68
Registered: 4-2004
| | Posted on Tuesday, December 20, 2005 - 8:21 pm: | 
|
can you run the magnum power filter cord for the s-3 with 500 watts.. thanks purp |
Tech808
Moderator
Username: Tech808
Post Number: 8699
Registered: 8-2002
| | Posted on Tuesday, December 20, 2005 - 8:44 pm: |
|
Purplehaze,
Yes, as the Power Cord is designed to supply power to the Radio ONLY and eliminate noise problems in the power cord to the radio.
You would NOT be using the power cord filter for the power for the amp as you would want that power to come direct from your battery.
Specifications
Code: P03-01090
P03-01090 PLF-10C Power Cord w/Filter
$ 19.99
FEATURES:
For use with 3 pin cords as used on Cobra, Uniden, Galaxy, RCI, etc.
(and Magnum 3 pin power cords)
Transceiver Power Cord with Integrated Power Line Filter
Replaces Your Transceiver's Stock Power Cord
Eliminates Alternator and Ignition Noise Problems
Improves the Receiver's Signal-to-Noise Ratio
Inline Fuse to Protect Transceiver
Over 7 Feet of the Highest Quality 14 Gauge Cable
10 Amps Maximum Current Handling
Operates from 6 - 16 Volts DC
Lon
Tech808
CEF808
N9OSN |
Purplehaze
Member
Username: Purplehaze
Post Number: 69
Registered: 4-2004
| | Posted on Tuesday, December 20, 2005 - 9:18 pm: |
|
ya i dont know what i was thinking thanks |
Patzerozero
Senior Member
Username: Patzerozero
Post Number: 2095
Registered: 7-2004
| | Posted on Wednesday, December 21, 2005 - 3:27 pm: |
|
regarding the fan kit for dx500-NO
get a couple plastic molys(the things you stick into the sheetrock before putting in screws) that fit tightly into amps cooling fins, & get a fan, & use long screws & screw into molys. & you're good! |
Wally38
Member
Username: Wally38
Post Number: 66
Registered: 3-2005
| | Posted on Wednesday, December 21, 2005 - 7:16 pm: |
|
That's a really good idea Patzerozero
|
Patzerozero
Senior Member
Username: Patzerozero
Post Number: 2100
Registered: 7-2004
| | Posted on Wednesday, December 21, 2005 - 7:48 pm: |
|
|
Wildrat
Advanced Member
Username: Wildrat
Post Number: 529
Registered: 12-2003
| | Posted on Wednesday, December 21, 2005 - 11:19 pm: |
|
When I mounted my TS 500 in the Jeep with the mounting band, I just put the fan up to the band and drilled two self tapping screws thru two of the holes on the fan into the band. Works like fine, has not fell on my head yet. I have a picture of the Jeep radio in member pictures. It's not a close up,but you can see the fan.
Wildrat
|
