Author |
Message |
Mrclean
Junior Member Username: Mrclean
Post Number: 16 Registered: 12-2003
| Posted on Thursday, December 15, 2005 - 12:58 pm: |
|
How do you adjust it. I think someone on this site designed it. Do you adjust at coil or by raising or lowering top part of antenna? |
Magnum410
Member Username: Magnum410
Post Number: 64 Registered: 12-2001
| Posted on Saturday, December 17, 2005 - 6:19 am: |
|
Here's a link to the PogoStick tuning manual. http://img.villagephotos.com/p/2004-12/913457/pogotune.jpg |
Tech833
Moderator Username: Tech833
Post Number: 1133 Registered: 8-2002
| Posted on Saturday, December 17, 2005 - 10:46 am: |
|
The aluminum element length adjusts the reactance, the coil lead adjusts the resistance. The two are somewhat interactive. That is an EXCELLENT antenna. I wish I had one still. I offered a guy $100 for his, but he didn't sell because he didn't want to go to the trouble of taking it down. RATS! |
Mrclean
Junior Member Username: Mrclean
Post Number: 17 Registered: 12-2003
| Posted on Saturday, December 17, 2005 - 11:18 am: |
|
Wish I could talk to you 833. Have some info that may intrest you. |
Mrclean
Junior Member Username: Mrclean
Post Number: 18 Registered: 12-2003
| Posted on Saturday, December 17, 2005 - 11:23 am: |
|
Thanks Mag 410!! |
Tech833
Moderator Username: Tech833
Post Number: 1135 Registered: 8-2002
| Posted on Saturday, December 17, 2005 - 2:30 pm: |
|
Drop me an email. I will be glad to talk to you about whatever you want. I'm not stuck up. |
Mrclean
Junior Member Username: Mrclean
Post Number: 19 Registered: 12-2003
| Posted on Saturday, December 17, 2005 - 6:27 pm: |
|
Don't have your email address and your info page says I can't PM you. If you want you can email me. My email is on my info page on this site.I think you will like the info I have. Peace!! |
Tech808
Moderator Username: Tech808
Post Number: 8680 Registered: 8-2002
| Posted on Sunday, December 18, 2005 - 7:45 am: |
|
Mrclean, You can contact / e-mail Tech833 by sending an e-mail to him at: Tech833@copperelectronics.com Hope this helps, Lon Tech808 CEF808 N9OSN |
Mrclean
Junior Member Username: Mrclean
Post Number: 20 Registered: 12-2003
| Posted on Sunday, December 18, 2005 - 10:46 am: |
|
Thanks! |
Magnum410
Member Username: Magnum410
Post Number: 66 Registered: 12-2001
| Posted on Monday, December 19, 2005 - 7:47 am: |
|
No prob Mrclean |
Magnum410
Member Username: Magnum410
Post Number: 67 Registered: 12-2001
| Posted on Wednesday, December 21, 2005 - 5:45 am: |
|
"That is an EXCELLENT antenna. I wish I had one still. I offered a guy $100 for his, but he didn't sell because he didn't want to go to the trouble of taking it down. RATS!" Moderator Note! You can contact / e-mail Tech833 by sending an e-mail to him at: Tech833@copperelectronics.com
|
Mrclean
Junior Member Username: Mrclean
Post Number: 21 Registered: 12-2003
| Posted on Friday, January 20, 2006 - 3:11 pm: |
|
Coil load length. Is that 7/8 the mesurement of were windings start on coil? SWR is 1.8. Like to make alittle better. Top stinger is 65 inches. |
Tech833
Moderator Username: Tech833
Post Number: 1160 Registered: 8-2002
| Posted on Friday, January 20, 2006 - 10:58 pm: |
|
Top element should be 66 inches from the nut. The 7/8 inch measurement is how much of the coil wire should stick out the bottom of the clamp piece. |
Kid_vicious
Senior Member Username: Kid_vicious
Post Number: 1076 Registered: 9-2004
| Posted on Sunday, January 22, 2006 - 7:54 pm: |
|
where can i find a pic of this antenna? im intruiged! matt |
Mrclean
Junior Member Username: Mrclean
Post Number: 22 Registered: 12-2003
| Posted on Thursday, January 26, 2006 - 12:18 am: |
|
Dont know were you could see a pic of one. It looks like a a99 but the top part is aluminum and it has 3 small radials angled down about 2/3s up the antenna with a small coil at the bottom. |