| Author |
Message |
    
Speccb
Junior Member
Username: Speccb
Post Number: 32
Registered: 12-2001
| | Posted on Wednesday, November 23, 2005 - 4:30 pm: | 
|
my radio tx is fine but the rx comes an goes whenever it decides. i have heated an cooled the board with no positive results. i have also put pressure on the board from both sides. it rx real low then gets loud an gets low again. i have also checked the volumn switch to be good. |
Mike0228
Junior Member
Username: Mike0228
Post Number: 33
Registered: 6-2004
| | Posted on Thursday, November 24, 2005 - 11:22 am: |
|
If on a channel that has activity do you see S meter movement? I ask since I had what I thought was a problem with a brand new radio. The receive cut out now and then. Turns out my trusty external speaker had an intermittant so touching up the connections inside it with an iron solved it. The same could happen with internal speaker connections also. Past that take some time to carefully touch up or inspect all solder joints in the radio. Yeah can you spell time consuming?
Mike |
Speccb
Junior Member
Username: Speccb
Post Number: 33
Registered: 12-2001
| | Posted on Thursday, December 01, 2005 - 6:43 pm: |
|
it was a transister next to the vco that was loose |
