Copper Talk » Ask The Tech » Installations » Big Improvement!!!! « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Outkast
Junior Member
Username: Outkast

Post Number: 48
Registered: 9-2005


Posted on Tuesday, October 25, 2005 - 1:31 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Got bored today and decided to rewire the entire rig. Previously I had it wired as follows.

Radio Positive (+) wired to the Accessory spot in the fuse panel.

Radio Negative (-) wired to a ground along with the KL-200P using 12 Gauge wire.

Amp Positive (+) wired to the battery with a 10 Gauge wire.

The radio was dead keying 3 watts swinging to 6 watts with this set up, and the amp was dead keying 20 swinging to 60 on Am with SSB swinging up around 130 watts.

Rewired it like this:

Ran a 5 foot length of 4 Gauge wire into the car, added a distribution block to the end.

Ran the KL-200P Positive (+) to the distribution block along with the 148’s Positive (+)

Ran a 8 Gauge ground from the chassis just next to the amp to the KL’s Negative (-)

And added a 10 Gauge ground from the radio’s Negative (-) to a chassis ground.

The radio now dead keys at 3 watts swinging 7 ½ watts, and the amp is dead keying at 20 swinging to about 85 watts on AM with the SSB now peaking up around 185 watts. Sure wish I would have done this long ago!!

Outkast

CEF 650

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: