| Author |
Message |
    
Musky
New member
Username: Musky
Post Number: 6
Registered: 8-2005
| | Posted on Friday, September 23, 2005 - 11:54 am: | 
|
Anyone use one of these? A little pricey, but it would be great if it worked well. I see that they make several versions. Are they stout enough for a Moonraker 4? |
Slowhand
Member
Username: Slowhand
Post Number: 84
Registered: 7-2005
| | Posted on Friday, September 23, 2005 - 6:08 pm: |
|
my neighbor used one on a super lazer 500. Only problem was when he lowered the beam. He had to unhook one guy wire to let the beam by. Looked awful scary to me. The hazer worked fine, the tower is the problem due to guy wires being an obstruction upon lowering. |
Road_warrior
Advanced Member
Username: Road_warrior
Post Number: 872
Registered: 7-2004
| | Posted on Friday, September 23, 2005 - 7:36 pm: |
|
Here some Glenn Martin reviews by users.
JIM/CEF375
PA
Moderators Note!
The Link e-ham.net has Links inside of the original Link and is not allowed under the Copper Forum Rules.
Advertising
You will not advertise or solicit other members to buy, sell or peruse any products or services through this discussion forum.
You may not post links or references to direct competitors of Copper Electronics.
|
Road_warrior
Advanced Member
Username: Road_warrior
Post Number: 874
Registered: 7-2004
| | Posted on Friday, September 23, 2005 - 8:00 pm: |
|
Anyhow, some users of the Hazers have plenty
of trouble with them. Some people have reported
poor quality and poor direction and the need to
modify the unit. Some people they worked decent
for them.
JIM/CEF 375 |
Musky
New member
Username: Musky
Post Number: 7
Registered: 8-2005
| | Posted on Friday, September 23, 2005 - 9:16 pm: |
|
I read some of the reviews and wanted to hear from cbr's who are a little more forgiving than alot of that sites' reviews. Oh, just wondering why it is wrong to post url's to a company that specializes only in tower/specialty equipmnent? Does Coppers sell that kind of stuff? If they do, then I can see why. |
Tech808
Moderator
Username: Tech808
Post Number: 7385
Registered: 8-2002
| | Posted on Friday, September 23, 2005 - 9:30 pm: |
|
Musky,
You can post any Helpful Link you want as long as it follows the Copper Forum Rules.
If the Link contains pop up ads or other Links inside of the Link you post to a Competitor Of Copper Electronics your Post will then be Edited or Refused.
The FORUM RULES are Posted in the Top Left Hand Corner of the Forum here to read and follow before making a post.
If you or any Copper Forum Member should have any Questions or Comments on the Copper Forum Rules Please click on the Link below to e-mail the Copper Forummaster:
Forummaster@copperelectronics.com
It is his Forum and His Rules.
The Techs and Moderators have to follow the Rules that the Copper Forummaster sets for us when Approving Posts.
Hope this helps,
Lon
Tech808
CEF808
N9OSN |
Bburck
Junior Member
Username: Bburck
Post Number: 38
Registered: 1-2005
| | Posted on Saturday, September 24, 2005 - 8:13 am: |
|
I used to use a hazer when taking my Laser 400s down back in the day. I had a 40 ft tower that was guy wired also. What I would do is to take two equal lenghts of rope and tie them to the top of my tower, then I would pull the rope out into my yard and tent stake them down, I would run them out at the same angle and stake them off about 15 feet apart, as I lowered the beam, the beam would ride down the two peices of rope, kinda like a slide. I would stop the beam just before the elements would hit the ground, then go up a folding ladder to grap the boom and move it how I needed it. Hope this helps...
73s
Brian |
