Author |
Message |
747
Intermediate Member Username: 747
Post Number: 131 Registered: 8-2002
| Posted on Sunday, July 31, 2005 - 10:22 pm: |
|
Is an Emperor 5010 the same size as a DX chassis radio? Say a Ranger 2950, Galaxy 88 or Cobra 148? Looking for a mounting bracket to order before my radio gets here.
|
Bc910
Advanced Member Username: Bc910
Post Number: 566 Registered: 7-2004
| Posted on Sunday, July 31, 2005 - 11:21 pm: |
|
I'm almost positive it is, been a while since i had mine tho... BC |
Stickshift
Intermediate Member Username: Stickshift
Post Number: 238 Registered: 7-2003
| Posted on Sunday, July 31, 2005 - 11:59 pm: |
|
747, the bracket from a 148 will fit the emperor like a glove. I've had both radio's and used to interchange brackets all the time. The bracket that came with the emperor was a 2 piece bracket and the 148 a single piece. Other than that, the holes that mount the radio to the bracket will line up properly and work just as good. hope this helps |
Hollowpoint445
Advanced Member Username: Hollowpoint445
Post Number: 601 Registered: 6-2004
| Posted on Monday, August 01, 2005 - 5:59 am: |
|
I think it's the size of a 2510 - which is a bit narrower and shorter than a 148. |
Unit199
Intermediate Member Username: Unit199
Post Number: 139 Registered: 8-2003
| Posted on Monday, August 01, 2005 - 4:31 pm: |
|
The 5010 chassis is 7 3/4" Wide and 8 1/2" Deep. If you need more info just ask. Harve Unit199 CEF210 KB0YVK |
747
Intermediate Member Username: 747
Post Number: 133 Registered: 8-2002
| Posted on Monday, August 01, 2005 - 4:44 pm: |
|
Harve, would the bracket from a 148 work? |
Stickshift
Intermediate Member Username: Stickshift
Post Number: 240 Registered: 7-2003
| Posted on Monday, August 01, 2005 - 7:42 pm: |
|
747, yes the bracket from a 148 will work. |
Unit199
Intermediate Member Username: Unit199
Post Number: 140 Registered: 8-2003
| Posted on Monday, August 01, 2005 - 11:53 pm: |
|
The 148 bracket will work fine on the 5010. Hope this helps. Harve Unit199 CEF210 KB0YVK |
Rob5mike
Intermediate Member Username: Rob5mike
Post Number: 167 Registered: 7-2002
| Posted on Tuesday, August 02, 2005 - 11:36 am: |
|
Be careful when you put in the screws that mount the radio to the bracket.The original screws were short and if you use longer ones they will get into the main board and break the traces on the edge of the board,an easy fix is to use washers on them. Mike |
Bc910
Advanced Member Username: Bc910
Post Number: 570 Registered: 7-2004
| Posted on Tuesday, August 02, 2005 - 1:12 pm: |
|
Rob, if I remember correctly when I used long bolts, it not only broke a trace it grounded it out and caused a big repair bill. So be carefull BC |
Rob5mike
Intermediate Member Username: Rob5mike
Post Number: 168 Registered: 7-2002
| Posted on Tuesday, August 02, 2005 - 4:48 pm: |
|
Thats right BC! Sounds like you learned the hard way too! 2510,2600 & Lincoln are the same way. |
Tech808
Moderator Username: Tech808
Post Number: 7760 Registered: 8-2002
| Posted on Monday, October 24, 2005 - 6:29 pm: |
|
. |