Author |
Message |
Heavyweight
Junior Member Username: Heavyweight
Post Number: 17 Registered: 11-2004
| Posted on Thursday, July 21, 2005 - 6:50 pm: |
|
I have a new connex 3300 hp and the receive is a little poor.Around town it works ok but unless the skip is really strong i cant hear any long distant signals.Even if i use the pre amp it still not much better.Is there somthing inside the radio that can be tuned for better receive performance?And no my antenna(mobile)setup is not the problem,i have many other radios that work great with the same antenna and coax. |
Heavyweight
Junior Member Username: Heavyweight
Post Number: 18 Registered: 11-2004
| Posted on Sunday, July 24, 2005 - 4:06 pm: |
|
hello,anyone? |
Sonoma
Intermediate Member Username: Sonoma
Post Number: 198 Registered: 11-2001
| Posted on Monday, July 25, 2005 - 12:01 am: |
|
this is a fairly common board in this radio.here is a link that covers the 360014 board for a complete alignment.verify yours is the 360014 board and here is all the alignments for it. http://members.tripod.com/~Malzev/cb-funk/ept3600.htm |
Therealporkchop
Intermediate Member Username: Therealporkchop
Post Number: 257 Registered: 11-2002
| Posted on Sunday, July 24, 2005 - 11:45 pm: |
|
Have you tried to align the receiver yet? There is a receiver mod you can do, but you need to put it on a switch cause close/strong stations will overload your receivers front end. Email me and I'll try to help you farther... |