Copper Talk » Ask The Tech » Radio's Mobile » Archived Messages » TRC 448 « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Al_lafon
Junior Member
Username: Al_lafon

Post Number: 44
Registered: 3-2005
Posted on Thursday, July 07, 2005 - 12:24 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Ok i am stupid or what who knows what PLL is
in the TRC 448 and can it be moded ? if you have
info on this thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech808
Moderator
Username: Tech808

Post Number: 6269
Registered: 8-2002


Posted on Thursday, July 07, 2005 - 12:44 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Al_lafon

REC86345 PLL

Models include:- Courier Blazer 40D/Renegade 40/Rogue 40/Nightrider 40DR/Ranger 40D, Fannon Fanfare 125F/182F/184F/185PLL/185DF/190F, Realistic TRC448

Uses simple 8 bit binary programming.

Easily modified by changing the loop mixing crystal.

Below is all of the Information I have on the TRC448.

Clarifier mod for TRC 448 (PLL REC 86345).

This radio has dual audio output transitors and high level AM modulation. Nice old radio. This info is second hand information from a good source, but I have never tried it:

Clarifier mod:



1. Remove d15
2. One side of the clarifier is on ground. Leave it.
3. Cut the wire hooked to the other side, leave enough length to connect to the positive (+) side of C333. LEAVE THE CENTER WIRE ALONE.
4. TC-4 adjusts AM Frequency and TC 5 Adjusts SSB frequency.
5. This should give you +/- 2-3 khz slide, usually enough for someone on a certified CB channel.

Adjustments:

*AMC VR5
*ALC VR204
*AM DEADKEY VR210
*SSB MIC GAIN VR4



Hope this help's some,

Lon
Tech808
CEF808
N9OSN

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: