Copper Talk » Ask The Tech » Amplifiers » Stll having.. « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Carls86fiero
Junior Member
Username: Carls86fiero

Post Number: 49
Registered: 3-2005
Posted on Friday, June 03, 2005 - 5:14 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

problems with amp locking up. went with 2,3,9 foot jumpers and still wont work right..got to be bad amp is all i can think of. anyone with ideas let me know. and the radio i turned down to 2 watts am and 5-6 watts on ssb..magnum 257. im about to pull my hair out.
Top of pagePrevious messageNext messageBottom of page Link to this message

Road_warrior
Advanced Member
Username: Road_warrior

Post Number: 620
Registered: 7-2004
Posted on Friday, June 03, 2005 - 6:07 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

What kind of amp is it?
Sounds like relays could be sticking
or chattering.

JIm/ PA/ CEF 375
Top of pagePrevious messageNext messageBottom of page Link to this message

Crackerjack
Advanced Member
Username: Crackerjack

Post Number: 599
Registered: 7-2004
Posted on Friday, June 03, 2005 - 6:16 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Does the amp work on your Galaxy? If I remember -you have a 949, tight?
Top of pagePrevious messageNext messageBottom of page Link to this message

Nobodyknows
Junior Member
Username: Nobodyknows

Post Number: 10
Registered: 4-2005
Posted on Friday, June 03, 2005 - 8:29 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I have this one amp that works fine in the house but relays hang up on it in the mobile. Other amps I have work on the same mobile set-up just fine and never hang up the relays.. It can be a hair pulling delema!! Solution for me was a different amp. Wish I could help more besides saying Ground everything, try moving the amp far away from the radio and try an even lower dead key like 1 watt..
Top of pagePrevious messageNext messageBottom of page Link to this message

Chad
Intermediate Member
Username: Chad

Post Number: 304
Registered: 11-2004


Posted on Friday, June 03, 2005 - 11:36 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Do you have a dummy load that can handle the amp? Try that on the output of the amp. If it still latches maybe it's the amp. I'm still betting on some sort of RF feedback. Better coax to the antenna? I have a 3' jumper or less from a 257 to a KL300P and never had a problem. Everything is star grounded amp stays in SSB mode, more reason to latch. I run a 2-2.5 watt DK AM and recuctantly hammer it on SSB to get peaks of 200-225W.

Chad
Top of pagePrevious messageNext messageBottom of page Link to this message

Carls86fiero
Member
Username: Carls86fiero

Post Number: 50
Registered: 3-2005
Posted on Saturday, June 04, 2005 - 11:32 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

crackerjack, i did set my radio down to 1/2 watt DK. now the amp does not hang up as much, but i checked the wattage from the amp and at DK the amp is putting out a whopping 8 watts on am. hell i can get that with out the amp just by tuning the radio back up....i am really thinking i got a bad amp..just a thought, could they forgot to covert the amp before they sent it to me..
Top of pagePrevious messageNext messageBottom of page Link to this message

Dale
Member
Username: Dale

Post Number: 98
Registered: 12-2002
Posted on Saturday, June 04, 2005 - 11:53 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

does that amp have a am/ssb switch? is it a base or mobile amp?if mobile how big is your power supply? i havent seen this amp thats why i ask these questions .
Top of pagePrevious messageNext messageBottom of page Link to this message

Road_warrior
Advanced Member
Username: Road_warrior

Post Number: 624
Registered: 7-2004
Posted on Saturday, June 04, 2005 - 11:55 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Is it a new Amp?
What kind of Amp is it?
Top of pagePrevious messageNext messageBottom of page Link to this message

Carls86fiero
Member
Username: Carls86fiero

Post Number: 51
Registered: 3-2005
Posted on Saturday, June 04, 2005 - 2:43 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

It the KL-203. it has ssb switch and its a mobile amp. think of sending it back or having a tech here look at it. for the price i paid its really not worth me sending it back cause shipping will end up costing me more the it is worth..or trash it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Carls86fiero
Member
Username: Carls86fiero

Post Number: 52
Registered: 3-2005
Posted on Saturday, June 04, 2005 - 4:34 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

OK guys heres the deal..i called a buddy the old days. he came to see what the problem was with the amp. he got out of his car, stood there for 5 secs, reached in the trunk, and got out a 2 foot jumper and a coupler and told me to add it to the coax of the antenna.........problem solved..man i feel stupid.

he then told me those dummies at Wilson should know to use the right lenght of coax..2 feet added on makes it about 20 feet of coax now and it works fine.
Top of pagePrevious messageNext messageBottom of page Link to this message

Nobodyknows
Junior Member
Username: Nobodyknows

Post Number: 14
Registered: 4-2005
Posted on Saturday, June 04, 2005 - 5:42 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

lol, sometimes it's the simplest things? Good to hear you got it going.
Top of pagePrevious messageNext messageBottom of page Link to this message

Road_warrior
Advanced Member
Username: Road_warrior

Post Number: 628
Registered: 7-2004
Posted on Saturday, June 04, 2005 - 5:50 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I've never had problems with a Amp
no matter what length the jumper or
coax i've ran...Hummmmm
Don't feel stupid, you just never know what
will cure a problem in this business. LOL
I run 6 ft of coax from antenna to radio
in my car. And a 2 ft jumper from radio
to my KL-200 amp. SWRS are 1:1 1-40.
Swr rises just alittle when amp is on.
Anyway, glad you found the problem.

JIM/ PA/ CEF 375

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: