| Author |
Message |
    
Red_ranger
New member
Username: Red_ranger
Post Number: 4
Registered: 11-2004
| | Posted on Sunday, April 03, 2005 - 3:07 am: | 
|
I JUST INSTALLED AMP, TURNED PRE AMP ON AND SMELLED SOMETHING BURNT. TURNED THE POWER OFF. TURNED IT BACK ON AND WHEN THE PRE AMP ON I HEAR BUZZING. ANY IDEAS ON WHAT WRONG? |
Chrisdey
Junior Member
Username: Chrisdey
Post Number: 14
Registered: 1-2005
| | Posted on Thursday, May 12, 2005 - 11:38 pm: |
|
You wired in in reverse somehow. The burning smell is the plastic shielding on the wires. I did it too! If you are lucky, it still works. Be painfully accurate when wiring. |
Couchpotatoe
New member
Username: Couchpotatoe
Post Number: 7
Registered: 6-2005
| | Posted on Monday, June 13, 2005 - 9:30 pm: |
|
IF YOU PLUGGED IT IN BACKWARDS YOU'LL HAVE TO REPLACE THE 3 AMP PROTECTION DIODE LOCATE NEXT TO A 104 CAP OR WHEN YOU KEY UP AND IT KEYS UP IT WILL USUALLY NOT UNKEY WHEN YOU UNKEY |
