Copper Talk » Ask The Tech » Radio's Mobile » Archived Messages » Tristar 120 « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Kd4amg
Intermediate Member
Username: Kd4amg

Post Number: 167
Registered: 6-2003
Posted on Wednesday, March 09, 2005 - 7:22 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I need tune - up & mike wiring info on a tristar 120.... this rig appears to be mid 1980 s vintage.
digital readout
4 level led s / rf meter
volume / squelch/channel selector knobs
2 led under display ..1 HI -- 1 LOW
3 position switch between squelch knob & readout vertical hi/cb/lo from top to bottom.

size is about like a uniden 510 / 4 pin screw on mike connector...no 3 pin dc input on rear, has red/black cords coming through rear panel...pa/cb switch on side of unit

this unit has stock AM 40 cb channels
40 channels below channel ONE
40 channels above channel 40

AM only

Top of pagePrevious messageNext messageBottom of page Link to this message

Tech808
Moderator
Username: Tech808

Post Number: 5160
Registered: 8-2002


Posted on Wednesday, March 09, 2005 - 8:40 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Kd4amg,

You will find the Tristar 120 Tune Up information I have listed in the Modification List.

Stock Mic Wiring is:

PIN #1 ~ Audio
PIN #2 ~ Shield
PIN #3 ~ Receive
PIN #4 ~ Transmit

Hope this helps,

Lon
Tech808
CEF808
Top of pagePrevious messageNext messageBottom of page Link to this message

Kd4amg
Intermediate Member
Username: Kd4amg

Post Number: 168
Registered: 6-2003
Posted on Wednesday, March 09, 2005 - 9:26 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

So mike wiring appears to be same as some MIDLAND models... thanks for your help...Bobby

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: