Copper Talk » Ask The Tech » Amplifiers » S-9 and amp « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Bubbam
New member
Username: Bubbam

Post Number: 1
Registered: 3-2005
Posted on Saturday, March 05, 2005 - 10:59 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

i have a s-9 and a texas star 250 hd will that setup damage my radio and what size amp would you recommend
Top of pagePrevious messageNext messageBottom of page Link to this message

1861
Intermediate Member
Username: 1861

Post Number: 112
Registered: 2-2004


Posted on Saturday, March 05, 2005 - 11:19 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I BELIEVE THEY RECOMEND USING THE S-9 WITH A TS 500 . WAY TOO MUCH RADIO FOR TS 250
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech808
Moderator
Username: Tech808

Post Number: 5122
Registered: 8-2002


Posted on Saturday, March 05, 2005 - 11:27 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Bubbham,

WELCOME TO THE COPPER FORUM!

Below is what Sam Lweis Owner of RF Limited / Magnum Internal has to say,

USE WITH AN AMPLIFIER

The S-3, S-9,and Omega Force S-45 and S-6 were designed to work with a 4 pill Amplifier like the Texas Star 500 or Similar Amplifier that uses 4 - 2SC2879's.

"DO NOT ATTEMPT" to run the Magnum S-3, S-9, S-6 or the Omega Force S-45 with any 2 PILL Amplifier!

Also if you use the Magnum S-3, S-6, S-9 or Magnum Omega Force S-45 with an Amplifier that uses an Exciter/Driver you MUST have the radio adjusted for a Dead Key of 4 watts and NO More than 12 watts PEP.

It is Highly Suggested that you have a professional do this.


Hope this helps,

Lon
Tech808
CEF808
N9OSN

PS,

When you get a chance check out the topics in the Open Area on the CEF Radio Club


Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: