Copper Talk » Ask The Tech » General Technical Questions » Archived Messages » Ss3900 leds « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Speccb
Junior Member
Username: Speccb

Post Number: 26
Registered: 12-2001
Posted on Sunday, October 17, 2004 - 11:01 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)
I know the leds get their voltage from the center leg of the reg. The only time the voltage is correct is when I lift the center leg from the board. I changed the reg. an got the same results.I believe there is a part shorted.I have pulled res. an caps. around the reg. area.I have even cut the traces in some areas an the leds came on,by doing this lead me back toward the reg. area.
Top of pagePrevious messageNext messageBottom of page Link to this message

Speccb
Junior Member
Username: Speccb

Post Number: 29
Registered: 12-2001
Posted on Wednesday, November 24, 2004 - 12:11 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)
found a broken trace caused by bowing the chassic to fit the mounting brkt.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: