Copper Talk » Ask The Tech » Antennas » Reflector wire « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Spiderleggs
Junior Member
Username: Spiderleggs

Post Number: 19
Registered: 5-2002
Posted on Friday, October 01, 2004 - 12:24 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Can insulated wire be used as the reflector instead of uninsulated wire on a quad, and should it be single strand or stranded?
Top of pagePrevious messageNext messageBottom of page Link to this message

Tecnicoloco
Junior Member
Username: Tecnicoloco

Post Number: 49
Registered: 4-2003
Posted on Friday, October 01, 2004 - 4:07 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

you can use any of the 2 types:insulated,bare,solid or stranded,but them you gonna have to re-calculated the length of the cable with or without insulation of your choice due to a factor of capacitance loading.
Try to stick with the original for your quad,if is a bare cable,spray some coats of Krilon Clear Coat to it for better weatherproof.

Good Luck Amigo.
Tecnicoloco
73's
Top of pagePrevious messageNext messageBottom of page Link to this message

Spiderleggs
Junior Member
Username: Spiderleggs

Post Number: 20
Registered: 5-2002
Posted on Friday, October 01, 2004 - 8:33 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Is there a formula to be used to caculate the capacitance loading? I have the length without insulation, but didn't know if it changed with insulation added.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech833
Moderator
Username: Tech833

Post Number: 867
Registered: 8-2002
Posted on Tuesday, October 05, 2004 - 1:27 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

'Capacitance loading'? I think you meant to say - Velocity Factor.

Depending on the wire diameter and insulation material and thickness, the velocity factor will make the wire 'look' longer to the radio waves. You can usually find the velocity factor of the wire by contacting the manufacturer. It will be given in a percent. let's say, 85%. That means, 9 feet of the insulated wire will look like 10.35 feet to the RF.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bullet
Intermediate Member
Username: Bullet

Post Number: 372
Registered: 7-2003
Posted on Friday, October 08, 2004 - 5:35 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

they both come in play, the twisting of the wires does also have a some what coil like effect.

thier is a formula for this but i cant remember it right off as i dont use this kind of wire for my antennas.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech833
Moderator
Username: Tech833

Post Number: 872
Registered: 8-2002
Posted on Friday, October 08, 2004 - 10:47 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Stranded wire does have a slightly lower velocity factor than solid. However, compared to the effect of insulation on V.F., the 'twist' effect is negligible.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: