| Author |
Message |
    
Aircop12
Junior Member
Username: Aircop12
Post Number: 18
Registered: 5-2004
| | Posted on Sunday, August 01, 2004 - 6:50 pm: | 
|
What needs to be done to make this radio work on the 11 meter band. I got one that was still in the box and unused, and would like to use it for all my communication needs.
Thanks: |
Ca346
Advanced Member
Username: Ca346
Post Number: 907
Registered: 8-2003
| | Posted on Monday, August 02, 2004 - 3:54 pm: |
|
sent you an e-mail |
Tecnicoloco
Junior Member
Username: Tecnicoloco
Post Number: 42
Registered: 4-2003
| | Posted on Saturday, August 21, 2004 - 4:48 pm: |
|
Hi All:
I own a FT-101 EE,this radio does not have the Speech Proccesor Board,I like to know a source were I can find this board as well how to connect it.
Thanks in advance.
Tecnicoloco. |
Bbmfic
Junior Member
Username: Bbmfic
Post Number: 27
Registered: 1-2003
| | Posted on Friday, November 05, 2004 - 5:06 pm: |
|
you can get any after market pross. for it but call yaesu i think they still sell it or one that will work only the 101 e had the factory pross. in it |
Bbmfic
Junior Member
Username: Bbmfic
Post Number: 28
Registered: 1-2003
| | Posted on Friday, November 05, 2004 - 5:12 pm: |
|
AirCop all of the 101 s need the am filter u can get it from foxtango u need crystals for 11 meters jan crystal has them u need to mod the am to recive & a good tech. to realing the radio D-104 works best on that radio & to have the tubes americanized to use the tubes like the G E tubes u cant get the good toshiba tubes anymore
|
Jessdawg
New member
Username: Jessdawg
Post Number: 5
Registered: 2-2005
| | Posted on Sunday, February 27, 2005 - 10:41 pm: |
|
Is there any thing that can be done to get the FT-707 to work on the 11 meter band ??????????? |
Bruce
Senior Member
Username: Bruce
Post Number: 2287
Registered: 9-2003
| | Posted on Monday, February 28, 2005 - 4:45 am: |
|
Ft-707 ....?
For some reason there dosn't seem to be a way to make this radio go out of band..... Strange for a yaesu. |
Usa2112
Junior Member
Username: Usa2112
Post Number: 24
Registered: 2-2005
| | Posted on Tuesday, March 15, 2005 - 5:56 pm: |
|
Does an FT-901DM need to be re-aligned after adding the 11-meter crystals on the AUX ports of the band switch?
Anyone with anykind of info on this rig would be greatly apreciated.There is not alot of info on this rig aside from the users and maintanance manuals. |
2600
Advanced Member
Username: 2600
Post Number: 503
Registered: 7-2002
| | Posted on Sunday, March 20, 2005 - 2:02 am: |
|
If you try to do it that way, yes.
If you just choose one (or more) of the four 10-meter crystals to 'swap' for a different band, this is much simpler.
Seems to me there's a slug-tuned coil for each crystal, and the slug for the crystal you change will need to get tweaked, most likely.
Odds are it will give you 90% or more of the 10-meter performance without tweaking much else. The farther below 28 MHz you go, the bigger this difference will be. If you tweak the receiver/mixer/driver coils for 27 MHz, the 10-meter bands will be the (slightly) weaker ones.
Check out Yaesu Users Group I think they have a FT-901 manual or two available for NON-COMMERCIAL download. Might be slow, but it's free.
73
|
