Author |
Message |
Mike0228
New member Username: Mike0228
Post Number: 2 Registered: 6-2004
| Posted on Monday, July 19, 2004 - 7:36 am: |
|
Ok I should be shot. Unlocked the clarifier on my XL then was doing the adjustments to recenter the pot. In a moment of stupidity lost track of what I was doing and moved L-21 instead of L-59. I've looked at the schematic to try and figure what L-21 does and how I may have affected the rig. Anyone know??? Thanks Mac |
Tech808
Moderator Username: Tech808
Post Number: 3004 Registered: 8-2002
| Posted on Monday, July 19, 2004 - 6:25 pm: |
|
Mike0228, First off, WELCOME TO THE COPPER FORUM! GO to the Link below for the Complete Alignment Specs for the Grant XL. http://www.radiomods.co.nz/grantxlalignment.html You have mis-aligned the Loop Frequency output when you moved L-21. Hope this helps but you will need good equipment or take it to a good Tech with good equipment to get the radio aligned right again. Lon Tech808 |
Mike0228
New member Username: Mike0228
Post Number: 3 Registered: 6-2004
| Posted on Monday, July 19, 2004 - 9:24 pm: |
|
Excellent Lon that's just what I need. I have the equiptment to do it. No problem. Many thanks Mac |
Tech548
Moderator Username: Tech548
Post Number: 153 Registered: 5-2004
| Posted on Tuesday, July 20, 2004 - 12:12 pm: |
|
Mike0228 I'm confused. What modification calls for the removal of L-21, or any coil for that matter. Am I missing something here? Jeff Tech548 |
Mike0228
New member Username: Mike0228
Post Number: 4 Registered: 6-2004
| Posted on Friday, July 23, 2004 - 9:59 am: |
|
Jeff, Not removal. I "adjusted" L-21 in error. Mac |
Tech548
Moderator Username: Tech548
Post Number: 168 Registered: 5-2004
| Posted on Sunday, July 25, 2004 - 1:37 am: |
|
Good grief!! I sure misread that one. My oppologies Mike. Jeff Tech548 |