| Author |
Message |
    
Geekster
Junior Member
Username: Geekster
Post Number: 26
Registered: 6-2004
| | Posted on Thursday, June 24, 2004 - 8:53 am: | 
|
I had a question about the Kenwood TS-520S maybe someone can help me out?
On the fixed frequency operation... I was wanting to know more about the available crystals that could plug into the Crystal oscillator circuit (C-O-C).
Has anyone modified the TS-520S for any 11 meter RX/TX for SSB? I have the formulas and found a supplier for the crystals but wanted to know if the crystals would plug into the C-O-C board, and has anyone performed this modification before?
I am mostly interested for the frequency of the CEF nets in general.
Thanks! |
Geekster
Junior Member
Username: Geekster
Post Number: 41
Registered: 6-2004
| | Posted on Tuesday, June 29, 2004 - 7:02 am: |
|
Looks like that is not possible, since the frequency bandwidth will be too short. I need to change out the crystals on the band switch ah well.
 |
Tecnicoloco
Junior Member
Username: Tecnicoloco
Post Number: 41
Registered: 4-2003
| | Posted on Saturday, August 21, 2004 - 4:08 pm: |
|
Yes there is a Mod for the TS-520,very hard Mod but can be done to it.
you will disable the 10 Meter Band with this Mod.
Good Luck.
Tecnicoloco. |
Teham
Member
Username: Teham
Post Number: 62
Registered: 1-2004
| | Posted on Saturday, May 15, 2010 - 10:57 pm: |
|
very simple. take one of the 10 meter crystals out. if the one for 28 mhz is 34.995 then get a crystal for 33.995. net the crystal on freq and ur done will cover whole 11 meter band plus. tony/n5jva |
