Nighthawk
Junior Member Username: Nighthawk
Post Number: 10 Registered: 5-2002
| Posted on Saturday, May 01, 2004 - 5:49 pm: |
|
Thanks for the responses guys. The VR6 and VR7 are indeed the correct adjustments for power. But, when I cut R104 the radio will only key at the same low power as before but not modulate at all. The model of the board is PC621AA not the PC5833AA I stated last thread. I've read on previous posts that the R104 needs to be cut on model 719A and mine is a 719.Using a magnifying glass, I noticed that R102 had been cut and soldered back together. Does any of this matter? Thanks for your help. Nighthawk |