| Author |
Message |
    
Rob5mike
Intermediate Member
Username: Rob5mike
Post Number: 101
Registered: 7-2002
| | Posted on Wednesday, April 21, 2004 - 3:29 pm: | 
|
has anyone used this meter? Is it fairly accurate? |
Tech808
Moderator
Username: Tech808
Post Number: 2214
Registered: 8-2002
| | Posted on Friday, April 23, 2004 - 8:29 am: |
|
Rob5mike,
Yes the Dosy Meter's are Very Good reasonable Priced and Good Performing Meter's and Accurate.
And the Frequency Counter is DEAD ON!
If you look at My Picture's in the Ask the Tech Area under Installations you will see a Picture of My Dosy TFC-3001.
http://www.copperelectronics.com/cgi-bin/checkitout/checkitout.cgi?catalogSTORE:CKIE:prodD60-07054+
Hope this Help's
Lon
Tech808
|
Rob5mike
Intermediate Member
Username: Rob5mike
Post Number: 102
Registered: 7-2002
| | Posted on Friday, April 23, 2004 - 3:49 pm: |
|
Thanks Lon,yes I have looked at your pictures several times,someday I'll get my radio room looking like that.
The Frequency Counter is what I like the most about the TFC-3001 and it seems to be a good price.
Mike |
Snapperhead
Junior Member
Username: Snapperhead
Post Number: 165
Registered: 2-2002
| | Posted on Saturday, July 10, 2004 - 10:01 am: |
|
Hello there 808, Hey I bought a TFC-3001 from Copper about 2 years ago....I like it very much, but I have a question....I noticed that the freq counter is off just a bit....for example when I key my Kenwood up on AM say on 27.405. The freq counter reads 27.4055....Is there an adjustment inside of meter to get in right on frequency.....Thanks |
Tech808
Moderator
Username: Tech808
Post Number: 2906
Registered: 8-2002
| | Posted on Saturday, July 10, 2004 - 1:01 pm: |
|
Snapperhead,
If your Kenwood only has a 5 digit Freq Counter the Libra could be right.
If you want to have your TFC-3001 checked over to make sure everything is OK, you can call and send it to Dosy at:
Phone:
(800) 634-4077 / (269) 663-8574 / (574) 295-6884 Fax: (269) 663-2924
Address:
QP, Inc "Dosy Meters"
530 E. Lexington Avenue, #155
Elkhart, IN 46516.
Hope this helps.
Lon
Tech808
|
Airplane1
Intermediate Member
Username: Airplane1
Post Number: 207
Registered: 5-2004
| | Posted on Friday, October 29, 2004 - 1:06 pm: |
|
Is there a place to send a PDC 700 to get it recalibrated,My local shop says they dont have anything to send high watts into it?
I dont have a meter that I can use to set it myself.
Thanks, any info would be great.
|
