Author |
Message |
Parts_man
New member Username: Parts_man
Post Number: 8 Registered: 2-2004
| Posted on Saturday, March 06, 2004 - 7:45 am: |
|
Lon, I have a RCI-6900F150. It is capible of about 50 watts dead key. I need 30 watts dead key to dive a amp I have; can the RF power be turned up to this with the dial at min.? I want to do this so that I will always know where to set the power as to not overdrive the amp by accident. Can I do this without voiding copper warranty and which pot do I adjust? Thanks, CEF#312 |
Parts_man
New member Username: Parts_man
Post Number: 9 Registered: 2-2004
| Posted on Saturday, March 06, 2004 - 12:13 pm: |
|
New update. Amp came in after I wrote previous post. It's a Sweet sixteen Texastar. Looking at the amp it says max drive 30 watts. With only 4 watts drive it dead keys 700 watts and swings about 1100. Now I need to turn radio down to get about 300 dead key. Same questions? Also when I key amp the fans go off. Any suggestions. Thanks, Sam |
Crafter
Advanced Member Username: Crafter
Post Number: 961 Registered: 12-2002
| Posted on Sunday, March 07, 2004 - 1:05 am: |
|
Use a modulator the I like the V-Plus. |
Thunderbolt
Junior Member Username: Thunderbolt
Post Number: 37 Registered: 1-2002
| Posted on Monday, March 08, 2004 - 1:38 pm: |
|
I was reading this post and was really confused. You have a 6900F150 radio wich is capable of doing up to 150 watts of swing. You can turn the varible on the radio down to whatever you want and still swing almost 150 watts. Now for the sweet sixteen,that can take up to 150 watts swing input so your 6900 should drive it just fine.Usually out of the box it does about 40 watts and 100 swing. I dont know how you got 700 dead key from it with only 4 watts in since it does not have a built in driver. You may have to retune the 6900 slightly to acheave the wattage you want on dead key. Just check it with a meter while turning the varible on the front of the radio. You might find it is set up fine. |
Parts_man
Junior Member Username: Parts_man
Post Number: 15 Registered: 2-2004
| Posted on Monday, March 08, 2004 - 9:15 pm: |
|
Thunderbolt, Not real sure what happened. Anyway, short story, 6900 is now inside and 88 is in truck. I added a modulator before sweet sixteen. Set deadkey out of modulator at 30 watts. Got 100 deadkey out of sweet sixteen with a swing of around 1300 watts. Not enough deadkey out of sweet sixteen, so I turned the modulator up to bring deadkey to 400 watts. Everything seems to work fine now. A tech I know said that what you put in was not definatly exact as long as deadkey was around 25-30% of what the swing was. Do you think I'm o.k.?
|
Parts_man
Junior Member Username: Parts_man
Post Number: 16 Registered: 2-2004
| Posted on Monday, March 08, 2004 - 9:20 pm: |
|
Also looking for answer to question about fans cutting of when I key up on sweet sixteen. Thanks for all the help. cef 312 |
Tech8541
Moderator Username: Tech8541
Post Number: 126 Registered: 12-2003
| Posted on Monday, March 08, 2004 - 9:39 pm: |
|
that tech is correct. you really don't want more than 350w carrier out of the sweet 16. as for the fan, you can put small ferrite chokes on the dc lines to the fan or 22uh chokes in the lines. |
Parts_man
Junior Member Username: Parts_man
Post Number: 18 Registered: 2-2004
| Posted on Tuesday, March 09, 2004 - 1:31 pm: |
|
Tech8541, The fans have 3 wires-red,black,white- where do I put the ferrite beads? Thanks, |
Pp1616
Intermediate Member Username: Pp1616
Post Number: 113 Registered: 2-2004
| Posted on Tuesday, May 11, 2004 - 11:05 am: |
|
just picked up a lot of 4 items for 400$ sweet 16, remote for sweet16, mod v, and some noise toy thing.. sold every thing but the sweet 16 after all said and done i paid 70$ for the sweet 16 lol and remote |
Tech808
Moderator Username: Tech808
Post Number: 2361 Registered: 8-2002
| Posted on Tuesday, May 11, 2004 - 7:43 pm: |
|
Pp1616, Thats sounds like you came out GREAT on that SWEET deal. A very CHEAP way to get that 30 / 300 +++++++ Watts. Lon Tech808 |