Copper Talk » Ask The Tech » Radio's Mobile » Archived Messages » Can a tech answer this? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Orion
Posted on Tuesday, May 27, 2003 - 1:09 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

What does the "-20db", "-38db" and "-44db" indicate in the three examples of popular mics listed below. I guess a good way to answer it would be by saying "the -20db is _____ compared to the -44db".

Output Level: -20 dB below 1 volt per microbar at 1 kHz into 1 megohm load

Output Level: -38 dB below 1 volt per microbar at 1 kHz into 1 megohm load

Output Level: -44 dB below 1 volt per microbar at 1 kHz into 1 megohm load
Top of pagePrevious messageNext messageBottom of page Link to this message

2600
Posted on Monday, June 02, 2003 - 2:17 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

The "dB" is a ratio between two power levels. A two-to-one power ratio is very nearly 3 dB. A calculator will say that it is 3.0103 dB. A ten-to-one power ratio is 10 dB. A hundred-to-one power ratio is 20 dB. A thousand-to-one is 30 dB, and a ten thousand-to-one power ratio is 40 dB. Since power increases (or decreases) as the square of voltage, 10 dB is a voltage ratio of 3.16 to one.

Using their "1 Volt" reference point, -20 dB would be one-tenth of a Volt.

-38 dB should be around .012 Volts.

-44dB should be half that, more conveniently described as around 6 milliVolts, or .006 Volts.

The way microphone output levels are described, the lower the "dB" number, the higher the actual mike output level. The higher the number, the wimpier it is.

73

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: