Copper Talk » Ask The Tech » Radio's Mobile » Archived Messages » Galaxy 48T « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Coalhauler25
Posted on Friday, May 09, 2003 - 6:05 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I just ordered a galaxy 48t from copper and had the channel conversion and the tune up performed , and i was wondering what kind of wattage this radio will be putting out , any info would greatly appreciated, thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech671
Posted on Friday, May 09, 2003 - 11:53 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I'm not sure how they tuned it but it should vary from 2-40w carrier and 20-120 peak.
Top of pagePrevious messageNext messageBottom of page Link to this message

Thunderhead
Posted on Saturday, May 10, 2003 - 8:09 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I just purchased a new 48T and it has been converted and tuned. I was wondering why it doesnt modulate at 100% modulation with the stock mic. It really doesnt make much difference if I run the mic gain all the way up or at about 3/4. I have ordered a new D104 power mic for it, and was just wondering if this mic will make a big difference on the radio. The radio right now dead keys 48watts and swings to about 80watts on my meter. What I want to achieve is alot of forward swing. If the mic wont do it what will.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech671
Posted on Sunday, May 11, 2003 - 12:37 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

The meter reading is adjustable inside the radio. What meter are you using for power readings?
Top of pagePrevious messageNext messageBottom of page Link to this message

Thunderhead
Posted on Sunday, May 11, 2003 - 8:06 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I'm using a syncron meter. Its a cheapy.
Top of pagePrevious messageNext messageBottom of page Link to this message

Thunderhead
Posted on Sunday, May 11, 2003 - 9:43 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

The model on the meter is swr-2001 NLS. Forgot to mention that.
Top of pagePrevious messageNext messageBottom of page Link to this message

Thunderhead
Posted on Sunday, May 11, 2003 - 10:59 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Tech671, I have one more question about the talkback on the 48T. The talkback on my radio is actually pretty quiet when I have the talkback turned up all the way on am, but when I switch it into fm mode with the talkback all the way up it's really loud. I was wondering if that's the way its suppose to be. I was also wondering why the meter doesn't do anything when its in the fm mode, it doesnt show modulation or anything. Thanks again
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech671
Posted on Monday, May 12, 2003 - 6:17 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

The power readings you get from the Synchron are "average" reading, and normal for the figures you gave.
The FM side will not show modulation reading, but as I recall will show power reading when switched to power reading mode. I don't recommend exceeding 50w on FM nor AM carrier.
Talkback usually increases when the transmitter has insufficient ground, meaning you probably were running way over 50w when in FM.
Top of pagePrevious messageNext messageBottom of page Link to this message

Thunderhead
Posted on Monday, May 12, 2003 - 9:04 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Thanks for all your help tech 671. The meter does show power reading in fm mode, I guess I forgot to try that mode. If I have anymore problems or questions I'll know where to go. Now I know that my radio is working correctly.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: