| Author |
Message |
    
Quackdaddy
| | Posted on Thursday, October 03, 2002 - 9:00 pm: | 
|
I've got a Uniden Washington base with a 5 pin stock microphone. I want to use my D104 with a TUG8 base but it has a 4 wire cord. Can I use the 4 wire or not? If I can, would someone please list the correct wiring sequence? |
Tech671
| | Posted on Thursday, October 03, 2002 - 9:26 pm: |
|
It should be 1 audio 2 shield 3 transmit 4 no connection 5 receive. That's 1-2-3-5, white, shield, red, black. |
Quackdaddy
| | Posted on Friday, October 04, 2002 - 8:01 am: |
|
I wired the mic as you stated and when I plugged it into the radio, it caused the radio to key up. Pressing the bar microphone transmit bar causes it to unkey.
What did dumb me do, wire something backwards? |
Tech808
| | Posted on Friday, October 04, 2002 - 10:56 am: |
|
Quackdaddy,
My Book for the Astatic 575 & D-104M with the TUG8 Stand shows;
PIN ~ #1 ~ Shield
PIN ~ #2 ~ White
PIN ~ #3 ~ Red
PIN ~ #4 ~ Black
Try this and let me know if it works for you.
Hope this helps!
Lon
tech808 |
Quackdaddy
| | Posted on Friday, October 04, 2002 - 2:04 pm: |
|
Lon - Tech808,
Are you saying that I need to leave pin 5 open? |
Tech808
| | Posted on Friday, October 04, 2002 - 4:53 pm: |
|
Quackdaddy,
According to the book you leave Pin #5 Open.
Standard wiring for Washington(858) is:
Pin #1 ~ Shield
Pin #2 ~ Audio
Pin #3 ~ Transmit
Pin #4 ~ Receive
TUG-8 COLOR CODE IS:
WHITE - AUDIO
SHIELD - GROUND
RED - TRANSMIT
BLACK RECEIVE
Both are Electronic Switching
If this does not work let me know and I will pull a D-104 with TUG-8 Stand out and check it to make sure as I have over 70 in boxes with the radios I had them hooked up to marked on them.
I have a small collection. LOL
I hope this helps!!!!!
Lon
tech808 |
|
