| Author |
Message |
    
Dale
Senior Member
Username: Dale
Post Number: 2385
Registered: 12-2002
| | Posted on Wednesday, August 12, 2020 - 10:28 pm: | 
|
i picked this up at a yard sale for 10 dollars .. only thing wrong is the nut on the back of radio that holds antenna jack is completely gone,the antennas jack isd there. my question is does anyone know the deminsions so i can go get one
dale/a.k.a.hotrod
cef426
cvc#64
454 [dx numbers]
38lsb
|
Charliebrown
Advanced Member
Username: Charliebrown
Post Number: 728
Registered: 10-2002
| | Posted on Thursday, August 13, 2020 - 6:18 pm: |
|
Any nut off any other radio will fit. When I junk a radio for parts I always save the entire connector. nut and all. |
Dale
Senior Member
Username: Dale
Post Number: 2387
Registered: 12-2002
| | Posted on Sunday, August 16, 2020 - 10:06 pm: |
|
thanks cb.. i really dont have a junk cb to take one from.
dale/a.k.a.hotrod
cef426
cvc#64
454 [dx numbers]
38lsb
|
Raya
Junior Member
Username: Raya
Post Number: 36
Registered: 6-2017
| | Posted on Tuesday, August 25, 2020 - 8:27 pm: |
|
Go to the nearest Lows or Home Depot and look in the hardware section where they sell nuts bolts and screws. Look for a small bag of #4 and or #6 nuts and screws. I suggest getting one bag of each. Try each one and see which one fits. You may have to cut off the excess bolt to prevent the bolt from shorting contacts in the radio. Just be careful to prevent shorting anything in the radio itself. |
