| Author |
Message |
    
Ericsm34
Junior Member
Username: Ericsm34
Post Number: 23
Registered: 4-2015
| | Posted on Tuesday, November 03, 2015 - 10:57 am: | 
|
I have a Uniden 980SSB and was wondering which amp would work best with this radio, Texas Star 350 or Texas Star 500. |
Press_man
Advanced Member
Username: Press_man
Post Number: 893
Registered: 5-2008
| | Posted on Tuesday, November 03, 2015 - 6:52 pm: |
|
TS 350
73 Pressman
|
Charliebrown
Intermediate Member
Username: Charliebrown
Post Number: 469
Registered: 10-2002
| | Posted on Tuesday, November 03, 2015 - 6:57 pm: |
|
Both will work great. Depend's on how much power you want. |
Dale
Senior Member
Username: Dale
Post Number: 2245
Registered: 12-2002
| | Posted on Wednesday, November 04, 2015 - 8:00 pm: |
|
the 350 will be better of the two. the 980 wont be able to drive the 500 to full out put. .however the t.s 667v has a built in driver and that 980 will be a perfect match.
dale/a.k.a.hotrod
cef426
cvc#64
454 [dx numbers]
38lsb
|
Tred
New member
Username: Tred
Post Number: 1
Registered: 9-2016
| | Posted on Saturday, September 10, 2016 - 1:41 pm: |
|
I've got a Galaxy DX 29 HP 10 meter. low/high - 4/40 watt out put, can I use the TS 350 with this radio on low power and get the full benefit of the amp or will it work with this radio at all ?? |
Dale
Senior Member
Username: Dale
Post Number: 2293
Registered: 12-2002
| | Posted on Sunday, September 11, 2016 - 7:52 pm: |
|
you,ll get full output from the 350 with that radio . probaly just a little too much even.
id personally recommend the ts 500 for that radio
dale/a.k.a.hotrod
cef426
cvc#64
454 [dx numbers]
38lsb
|
Tred
New member
Username: Tred
Post Number: 2
Registered: 9-2016
| | Posted on Monday, September 12, 2016 - 2:03 pm: |
|
So with the 4 watt output I won't have a problem with the ts 500 or the ts 350, the ts 500 was a little more than i wanted to spend right now but if that's what will work better without causing a problem I'll look at the 500...Thanks |
Dale
Senior Member
Username: Dale
Post Number: 2294
Registered: 12-2002
| | Posted on Sunday, September 18, 2016 - 8:39 am: |
|
what it comes down to is how power each amp can handle. different amps will take different power
the 350 only has 2 transisters [pills] the 500 has 4. so naturally the 500 will take more input.as far as input 4 watt isnt what ya looking at im looking at full pep power and 40 watts input is really just a tad too much for the 350.if you really want the 350 then my best advice is just use like a cobra 29 or uniden 77 or similar.
dale/a.k.a.hotrod
cef426
cvc#64
454 [dx numbers]
38lsb
|
